Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Filtros de ar e filtragem química
Filtro de eficiência média de fibra sintética
A durable synthetic-media filter for humid or demanding HVAC service where fiber integrity and stable airflow are priorities.
- Tear-Resistant Synthetic Media
- Humidity-Tolerant Construction
- Stable Mechanical Capture
- Flexible Format Options
Introdução do produto
The synthetic-fiber medium-efficiency filter uses a graded nonwoven polyolefin or polyester medium formed as stabilized pockets or rigid pleats. Fiber diameter and layer density change through the media depth so particles are stored progressively rather than concentrated on the entering face. Welded or stitched pocket seams resist tearing, while a supported pleated version uses corrosion-resistant mesh and a sealed frame. The synthetic construction avoids glass-fiber shedding and retains structural strength in humid supply-air systems, food facilities and clean support areas.
Características-chave
Hydrophobic fibers retain tensile strength when exposed to humid outdoor or process air.
Welded pocket seams or wire-supported pleats control media movement during fan cycling.
Low-shedding polymer media is suitable where brittle glass fibers are undesirable.
Preocupações do produto do cliente
Synthetic filters are selected when moisture, abrasion or fiber-release concerns make conventional glass media difficult to maintain.
Humid intake air weakens media and causes pockets to sag.Hydrophobic polyester or polyolefin fibers retain strength and dimensional stability at high relative humidity.
Brittle fibers release during filter handling near sensitive processes.Continuous synthetic filaments and bonded nonwoven layers reduce loose-fiber shedding.
Pockets tear along stitch lines after repeated fan cycling.Reinforced seams and controlled pocket geometry distribute tension along the full pocket length.
Surface-loaded media reaches high resistance before using its full depth.A progressive-density fiber profile stores larger particles upstream and finer particles deeper in the medium.
Aplicações típicas
Food and beverage ventilationHumid-climate air handlersCleanroom preparatory filtrationHospitals and public buildingsIndustrial supply and return-air systems
Parâmetros técnicos
Typical construction ranges for a synthetic-fiber medium-efficiency HVAC filter are shown below.
| Material principal | Progressive-density polyester or polyolefin nonwoven filter media |
|---|---|
| Painel de espessura | 45-100 mm for pleated panels or 25 mm header depth for pocket filters |
| Largura efetiva | 287-610 mm modular face width |
| Comprimento máximo | Up to 635 mm pocket depth or 610 mm panel face length |
| Aço enfrentando espessura | 0.35-0.60 mm galvanized support mesh or 0.70-1.00 mm header channels |
| Densidade Core | Approximately 35-85 kg/m³ nominal synthetic-media bulk density |
| Condutividade térmica | Approximately 0.035-0.045 W/(m·K) for the dry synthetic medium |
| Superfície acabado | White or efficiency-color-coded synthetic media with galvanized or molded-plastic framing |
| Tipo conjunto | Ultrasonically welded pockets or wire-supported pleats continuously sealed into the perimeter frame |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
ISO ePM10, ePM2.5 or ePM1 performancePocket, pleated-panel or compact-cell formatHydrophobic or antimicrobial-treated synthetic mediaPlastic, galvanized or fully incinerable frame
Planning a Synthetic-Fiber Medium-Efficiency Filter specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
