Three-quarter view of a synthetic-fiber medium-efficiency pocket filter

Hava filtreleri ve kimyasal filtrasyon

Sentetik Fiber Orta Verimlilik Filtresi

A durable synthetic-media filter for humid or demanding HVAC service where fiber integrity and stable airflow are priorities.

Tear-Resistant Synthetic Media
Humidity-Tolerant Construction
Stable Mechanical Capture
Flexible Format Options

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The synthetic-fiber medium-efficiency filter uses a graded nonwoven polyolefin or polyester medium formed as stabilized pockets or rigid pleats. Fiber diameter and layer density change through the media depth so particles are stored progressively rather than concentrated on the entering face. Welded or stitched pocket seams resist tearing, while a supported pleated version uses corrosion-resistant mesh and a sealed frame. The synthetic construction avoids glass-fiber shedding and retains structural strength in humid supply-air systems, food facilities and clean support areas.

Ana Özellikler

Graded synthetic layers combine coarse dust storage with finer downstream particle capture.

Hydrophobic fibers retain tensile strength when exposed to humid outdoor or process air.

Welded pocket seams or wire-supported pleats control media movement during fan cycling.

Low-shedding polymer media is suitable where brittle glass fibers are undesirable.

Müşteri Ürün Sorunları

Synthetic filters are selected when moisture, abrasion or fiber-release concerns make conventional glass media difficult to maintain.

Humid intake air weakens media and causes pockets to sag.Hydrophobic polyester or polyolefin fibers retain strength and dimensional stability at high relative humidity.

Brittle fibers release during filter handling near sensitive processes.Continuous synthetic filaments and bonded nonwoven layers reduce loose-fiber shedding.

Pockets tear along stitch lines after repeated fan cycling.Reinforced seams and controlled pocket geometry distribute tension along the full pocket length.

Surface-loaded media reaches high resistance before using its full depth.A progressive-density fiber profile stores larger particles upstream and finer particles deeper in the medium.

Tipik uygulamalar

Food and beverage ventilationHumid-climate air handlersCleanroom preparatory filtrationHospitals and public buildingsIndustrial supply and return-air systems

Teknik parametreler

Typical construction ranges for a synthetic-fiber medium-efficiency HVAC filter are shown below.

Temel malzemeler	Progressive-density polyester or polyolefin nonwoven filter media
Panel kalınlığı	45-100 mm for pleated panels or 25 mm header depth for pocket filters
Effective Width (Etkili Genişlik)	287-610 mm modular face width
Maksimum uzunluk	Up to 635 mm pocket depth or 610 mm panel face length
Çelik yüz yüze kalınlığı	0.35-0.60 mm galvanized support mesh or 0.70-1.00 mm header channels
Core Density (Çekirdek Yoğunluğu)	Approximately 35-85 kg/m³ nominal synthetic-media bulk density
Termal İletkenlik	Approximately 0.035-0.045 W/(m·K) for the dry synthetic medium
Yüzey bitirme	White or efficiency-color-coded synthetic media with galvanized or molded-plastic framing
Ortak tip	Ultrasonically welded pockets or wire-supported pleats continuously sealed into the perimeter frame
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

ISO ePM10, ePM2.5 or ePM1 performancePocket, pleated-panel or compact-cell formatHydrophobic or antimicrobial-treated synthetic mediaPlastic, galvanized or fully incinerable frame

Planning a Synthetic-Fiber Medium-Efficiency Filter specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun