English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مرشحات الهواء والترشيح الكيميائي
تصفية الألياف الاصطناعية المتوسطة الكفاءة
A durable synthetic-media filter for humid or demanding HVAC service where fiber integrity and stable airflow are priorities.
- Tear-Resistant Synthetic Media
- Humidity-Tolerant Construction
- Stable Mechanical Capture
- Flexible Format Options
مقدمة المنتج
The synthetic-fiber medium-efficiency filter uses a graded nonwoven polyolefin or polyester medium formed as stabilized pockets or rigid pleats. Fiber diameter and layer density change through the media depth so particles are stored progressively rather than concentrated on the entering face. Welded or stitched pocket seams resist tearing, while a supported pleated version uses corrosion-resistant mesh and a sealed frame. The synthetic construction avoids glass-fiber shedding and retains structural strength in humid supply-air systems, food facilities and clean support areas.
الخصائص الرئيسية
Hydrophobic fibers retain tensile strength when exposed to humid outdoor or process air.
Welded pocket seams or wire-supported pleats control media movement during fan cycling.
Low-shedding polymer media is suitable where brittle glass fibers are undesirable.
مخاوف المنتج للعملاء
Synthetic filters are selected when moisture, abrasion or fiber-release concerns make conventional glass media difficult to maintain.
Humid intake air weakens media and causes pockets to sag.Hydrophobic polyester or polyolefin fibers retain strength and dimensional stability at high relative humidity.
Brittle fibers release during filter handling near sensitive processes.Continuous synthetic filaments and bonded nonwoven layers reduce loose-fiber shedding.
Pockets tear along stitch lines after repeated fan cycling.Reinforced seams and controlled pocket geometry distribute tension along the full pocket length.
Surface-loaded media reaches high resistance before using its full depth.A progressive-density fiber profile stores larger particles upstream and finer particles deeper in the medium.
تطبيقات نموذجية
Food and beverage ventilationHumid-climate air handlersCleanroom preparatory filtrationHospitals and public buildingsIndustrial supply and return-air systems
المعلمات الفنية
Typical construction ranges for a synthetic-fiber medium-efficiency HVAC filter are shown below.
| المواد الأساسية | Progressive-density polyester or polyolefin nonwoven filter media |
|---|---|
| سمك اللوحة | 45-100 mm for pleated panels or 25 mm header depth for pocket filters |
| العرض الفعال | 287-610 mm modular face width |
| الحد الأقصى الطول | Up to 635 mm pocket depth or 610 mm panel face length |
| الصلب يواجه سمك | 0.35-0.60 mm galvanized support mesh or 0.70-1.00 mm header channels |
| الكثافة الأساسية | Approximately 35-85 kg/m³ nominal synthetic-media bulk density |
| الموصلية الحرارية | Approximately 0.035-0.045 W/(m·K) for the dry synthetic medium |
| إنهاء السطح | White or efficiency-color-coded synthetic media with galvanized or molded-plastic framing |
| نوع المشترك | Ultrasonically welded pockets or wire-supported pleats continuously sealed into the perimeter frame |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
ISO ePM10, ePM2.5 or ePM1 performancePocket, pleated-panel or compact-cell formatHydrophobic or antimicrobial-treated synthetic mediaPlastic, galvanized or fully incinerable frame
Planning a Synthetic-Fiber Medium-Efficiency Filter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
