Three-quarter view of a synthetic-fiber medium-efficiency pocket filter

공기 필터 및 화학 여과

합성섬유 중간효율 필터

A durable synthetic-media filter for humid or demanding HVAC service where fiber integrity and stable airflow are priorities.

Tear-Resistant Synthetic Media
Humidity-Tolerant Construction
Stable Mechanical Capture
Flexible Format Options

견적 요청 제품 찾아보기

상품 소개

The synthetic-fiber medium-efficiency filter uses a graded nonwoven polyolefin or polyester medium formed as stabilized pockets or rigid pleats. Fiber diameter and layer density change through the media depth so particles are stored progressively rather than concentrated on the entering face. Welded or stitched pocket seams resist tearing, while a supported pleated version uses corrosion-resistant mesh and a sealed frame. The synthetic construction avoids glass-fiber shedding and retains structural strength in humid supply-air systems, food facilities and clean support areas.

주요 기능

Graded synthetic layers combine coarse dust storage with finer downstream particle capture.

Hydrophobic fibers retain tensile strength when exposed to humid outdoor or process air.

Welded pocket seams or wire-supported pleats control media movement during fan cycling.

Low-shedding polymer media is suitable where brittle glass fibers are undesirable.

고객 제품 관심사

Synthetic filters are selected when moisture, abrasion or fiber-release concerns make conventional glass media difficult to maintain.

Humid intake air weakens media and causes pockets to sag.Hydrophobic polyester or polyolefin fibers retain strength and dimensional stability at high relative humidity.

Brittle fibers release during filter handling near sensitive processes.Continuous synthetic filaments and bonded nonwoven layers reduce loose-fiber shedding.

Pockets tear along stitch lines after repeated fan cycling.Reinforced seams and controlled pocket geometry distribute tension along the full pocket length.

Surface-loaded media reaches high resistance before using its full depth.A progressive-density fiber profile stores larger particles upstream and finer particles deeper in the medium.

일반적인 응용 프로그램

Food and beverage ventilationHumid-climate air handlersCleanroom preparatory filtrationHospitals and public buildingsIndustrial supply and return-air systems

기술 매개변수

Typical construction ranges for a synthetic-fiber medium-efficiency HVAC filter are shown below.

핵심 재료	Progressive-density polyester or polyolefin nonwoven filter media
패널 두께	45-100 mm for pleated panels or 25 mm header depth for pocket filters
유효 폭	287-610 mm modular face width
최대 길이	Up to 635 mm pocket depth or 610 mm panel face length
강철 면면 두께	0.35-0.60 mm galvanized support mesh or 0.70-1.00 mm header channels
코어 밀도	Approximately 35-85 kg/m³ nominal synthetic-media bulk density
열전도도 (Thermal Conductivity)	Approximately 0.035-0.045 W/(m·K) for the dry synthetic medium
표면 마무리	White or efficiency-color-coded synthetic media with galvanized or molded-plastic framing
접합 유형	Ultrasonically welded pockets or wire-supported pleats continuously sealed into the perimeter frame
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

ISO ePM10, ePM2.5 or ePM1 performancePocket, pleated-panel or compact-cell formatHydrophobic or antimicrobial-treated synthetic mediaPlastic, galvanized or fully incinerable frame

Planning a Synthetic-Fiber Medium-Efficiency Filter specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.