Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistema de piso para sala limpa
Solvent-Free High Build Epoxy Flooring (em inglês)
A high-solids epoxy floor system formulated without added solvent for dense coverage, low application odor and seamless concrete protection.
- Solvent-Free Formulation
- High-Build Coverage
- Low Application Odor
- Impervious Seamless Finish
Introdução do produto
Solvent-free high-build epoxy flooring uses a two-component thermosetting resin with very high solids content, so the applied material remains in the finished film rather than losing thickness through solvent evaporation. It is rolled, squeegeed or lightly filled depending on the required build and texture. The cured layer seals concrete against dust, oils and routine process splashes while creating a bright, easy-to-clean surface suited to enclosed rooms where strong solvent odor and extended ventilation are undesirable.
Características-chave
The absence of added solvent reduces application odor in enclosed refurbishment and production spaces.
The continuous thermoset film resists routine oils, detergents and dilute process splashes better than bare concrete.
Roller, squeegee and aggregate-broadcast variants allow smooth hygienic areas and textured traffic zones to share one resin chemistry.
Preocupações do produto do cliente
Enclosed facilities often need a durable resin finish without the odor, film loss and long ventilation period associated with solvent-bearing coatings.
Strong coating odor disrupts adjacent controlled rooms during refurbishment.A solvent-free high-solids binder minimizes solvent vapor and reduces odor at the application stage.
A wet coating dries much thinner than expected and leaves weak spots over the concrete profile.Near-total solids remain in the film, supporting predictable high-build coverage at the specified consumption.
Liquid penetrates hairline pores and stains an unsealed concrete slab.Primer plus a continuous epoxy body coat closes surface porosity and provides an impermeable finish.
Different rooms require both smooth cleaning and added traction.The same high-build resin can receive a smooth back-roll or a compatible aggregate broadcast and seal coat.
Aplicações típicas
Occupied cleanroom refurbishmentsPharmaceutical support spacesLaboratory service corridorsControlled warehousesMedical packaging rooms
Parâmetros técnicos
Typical construction data for a solvent-free, high-build epoxy floor over prepared concrete are listed below.
| Material principal | Two-part 100% solids pigmented epoxy resin with optional fine silica filler |
|---|---|
| Painel de espessura | 0.6–1.5 mm total cured system thickness |
| Largura efetiva | Typically 3000–4500 mm squeegee application bay width |
| Comprimento máximo | Typically up to 18000 mm uninterrupted placement between substrate joints |
| Aço enfrentando espessura | 0 mm; no steel sheet is incorporated in the resin build-up |
| Densidade Core | Approximately 1350–1550 kg/m³ for mixed pigmented epoxy |
| Condutividade térmica | Typically 0.25–0.40 W/(m·K) for the cured high-build epoxy |
| Superfície acabado | Smooth high-gloss, low-sheen or fine-textured pigmented epoxy |
| Tipo conjunto | Seamless primer-and-body-coat system with reinforced coves and sealed slab joints |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Smooth roller or textured broadcast finishClear or pigmented seal coatCoved skirting and wall-return detailsStandard gray, blue, green and custom color ranges
Planning a Solvent-Free High-Build Epoxy Flooring specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
