English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Системы полы для чистых комнат
Эпоксидные полы высокой конструкции без растворителей
A high-solids epoxy floor system formulated without added solvent for dense coverage, low application odor and seamless concrete protection.
- Solvent-Free Formulation
- High-Build Coverage
- Low Application Odor
- Impervious Seamless Finish
Введение продукции
Solvent-free high-build epoxy flooring uses a two-component thermosetting resin with very high solids content, so the applied material remains in the finished film rather than losing thickness through solvent evaporation. It is rolled, squeegeed or lightly filled depending on the required build and texture. The cured layer seals concrete against dust, oils and routine process splashes while creating a bright, easy-to-clean surface suited to enclosed rooms where strong solvent odor and extended ventilation are undesirable.
Основные характеристики
The absence of added solvent reduces application odor in enclosed refurbishment and production spaces.
The continuous thermoset film resists routine oils, detergents and dilute process splashes better than bare concrete.
Roller, squeegee and aggregate-broadcast variants allow smooth hygienic areas and textured traffic zones to share one resin chemistry.
Обеспокоенность клиентов продуктами
Enclosed facilities often need a durable resin finish without the odor, film loss and long ventilation period associated with solvent-bearing coatings.
Strong coating odor disrupts adjacent controlled rooms during refurbishment.A solvent-free high-solids binder minimizes solvent vapor and reduces odor at the application stage.
A wet coating dries much thinner than expected and leaves weak spots over the concrete profile.Near-total solids remain in the film, supporting predictable high-build coverage at the specified consumption.
Liquid penetrates hairline pores and stains an unsealed concrete slab.Primer plus a continuous epoxy body coat closes surface porosity and provides an impermeable finish.
Different rooms require both smooth cleaning and added traction.The same high-build resin can receive a smooth back-roll or a compatible aggregate broadcast and seal coat.
Типичные приложения
Occupied cleanroom refurbishmentsPharmaceutical support spacesLaboratory service corridorsControlled warehousesMedical packaging rooms
Технические параметры
Typical construction data for a solvent-free, high-build epoxy floor over prepared concrete are listed below.
| Основной материал | Two-part 100% solids pigmented epoxy resin with optional fine silica filler |
|---|---|
| Толщина панели | 0.6–1.5 mm total cured system thickness |
| эффективная ширина | Typically 3000–4500 mm squeegee application bay width |
| Максимальная длина | Typically up to 18000 mm uninterrupted placement between substrate joints |
| Толщина линий стали | 0 mm; no steel sheet is incorporated in the resin build-up |
| Плотность ядра | Approximately 1350–1550 kg/m³ for mixed pigmented epoxy |
| Теплопроводимость | Typically 0.25–0.40 W/(m·K) for the cured high-build epoxy |
| Поверхностная отделка | Smooth high-gloss, low-sheen or fine-textured pigmented epoxy |
| Объединенный тип | Seamless primer-and-body-coat system with reinforced coves and sealed slab joints |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Smooth roller or textured broadcast finishClear or pigmented seal coatCoved skirting and wall-return detailsStandard gray, blue, green and custom color ranges
Planning a Solvent-Free High-Build Epoxy Flooring specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
