Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Cleanroom Flooring Sistem
Solvent-Free High-Build Epoxy Flooring
A high-solids epoxy floor system formulated without added solvent for dense coverage, low application odor and seamless concrete protection.
- Solvent-Free Formulation
- High-Build Coverage
- Low Application Odor
- Impervious Seamless Finish
Perkenalan produk
Solvent-free high-build epoxy flooring uses a two-component thermosetting resin with very high solids content, so the applied material remains in the finished film rather than losing thickness through solvent evaporation. It is rolled, squeegeed or lightly filled depending on the required build and texture. The cured layer seals concrete against dust, oils and routine process splashes while creating a bright, easy-to-clean surface suited to enclosed rooms where strong solvent odor and extended ventilation are undesirable.
Fitur utama:
The absence of added solvent reduces application odor in enclosed refurbishment and production spaces.
The continuous thermoset film resists routine oils, detergents and dilute process splashes better than bare concrete.
Roller, squeegee and aggregate-broadcast variants allow smooth hygienic areas and textured traffic zones to share one resin chemistry.
Kekhawatiran produk pelanggan
Enclosed facilities often need a durable resin finish without the odor, film loss and long ventilation period associated with solvent-bearing coatings.
Strong coating odor disrupts adjacent controlled rooms during refurbishment.A solvent-free high-solids binder minimizes solvent vapor and reduces odor at the application stage.
A wet coating dries much thinner than expected and leaves weak spots over the concrete profile.Near-total solids remain in the film, supporting predictable high-build coverage at the specified consumption.
Liquid penetrates hairline pores and stains an unsealed concrete slab.Primer plus a continuous epoxy body coat closes surface porosity and provides an impermeable finish.
Different rooms require both smooth cleaning and added traction.The same high-build resin can receive a smooth back-roll or a compatible aggregate broadcast and seal coat.
Aplikasi yang Tipis
Occupied cleanroom refurbishmentsPharmaceutical support spacesLaboratory service corridorsControlled warehousesRuang kemasan medis
Parameter teknis
Typical construction data for a solvent-free, high-build epoxy floor over prepared concrete are listed below.
| Bahan inti | Two-part 100% solids pigmented epoxy resin with optional fine silica filler |
|---|---|
| Ketebalan Panel (Panel Thickness) | 0.6–1.5 mm total cured system thickness |
| Efektif lebar | Typically 3000–4500 mm squeegee application bay width |
| Panjang maksimum | Typically up to 18000 mm uninterrupted placement between substrate joints |
| Baja menghadap ketebalan | 0 mm; no steel sheet is incorporated in the resin build-up |
| Kepadatan inti (core density) | Approximately 1350–1550 kg/m³ for mixed pigmented epoxy |
| Konduktivitas Termal (Thermal Conductivity) | Typically 0.25–0.40 W/(m·K) for the cured high-build epoxy |
| Permukaan selesai | Smooth high-gloss, low-sheen or fine-textured pigmented epoxy |
| Jenis Bersama | Seamless primer-and-body-coat system with reinforced coves and sealed slab joints |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Smooth roller or textured broadcast finishClear or pigmented seal coatCoved skirting and wall-return detailsStandard gray, blue, green and custom color ranges
Planning a Solvent-Free High-Build Epoxy Flooring specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
