Three-quarter view of a complete single-person cleanroom air shower

인력 및 재료 오염 제거 장비

1 인실 클린룸 에어 샤워

A compact, interlocked chamber that removes loose particles from one gowned operator with directional recirculated filtered air before clean-side access.

One-Person Footprint
Directional Garment Jets
Interlocked Door Sequence
Low-Level Particle Return

견적 요청 제품 찾아보기

상품 소개

This cleanroom air shower provides a controlled transition between a gowning room and a clean area. After entry, the door sequence holds the passage closed while sidewall nozzles direct filtered air across the operator; released lint is collected through lower return grilles before the air is recirculated. Its compact straight-through layout is intended for single-file personnel traffic where entrance space is limited.

주요 기능

A narrow internal passage gives one fully gowned operator working clearance without enlarging the entrance footprint.

Adjustable nozzle rows can be aimed at sleeves, torso and lower garments.

Lower return grilles draw released particles downward rather than allowing them to settle on footwear.

A timed controller coordinates the cleaning period and the door-release sequence.

Smooth internal panels allow routine wipe-down of the occupied chamber surfaces.

고객 제품 관심사

A single-occupant entry needs repeatable garment cleaning without consuming valuable gowning-room space or creating confusing door operation.

Sleeves and trouser legs receive little cleaning when air is supplied at one height.Multi-level adjustable sidewall nozzles can cover upper and lower garment areas.

Premature clean-side opening can disturb the controlled boundary.The interlock keeps the exit secured until the programmed cycle has ended.

A large entrance unit crowds a compact gowning room.The blower, filtration path and returns are integrated within a slim self-contained enclosure.

Released particles can circulate around the operator.Low-wall return openings collect the particle-laden airflow close to the floor.

일반적인 응용 프로그램

Pharmaceutical gowning entrancesMedical-device assembly roomsElectronics cleanroom transitionsLaboratory controlled-area access

기술 매개변수

Typical construction ranges for a compact one-person air shower are listed below.

핵심 재료	Polyurethane-insulated powder-coated steel enclosure with stainless nozzle plates, prefilter and H13 HEPA recirculation stage
패널 두께	50 mm insulated enclosure panels
유효 폭	800-900 mm clear internal passage width
최대 길이	Up to 1200 mm chamber length
강철 면면 두께	1.0-1.2 mm formed steel sheet
코어 밀도	38-45 kg/m³ closed-cell polyurethane insulation
열전도도 (Thermal Conductivity)	0.022-0.028 W/(m·K) for the insulated panel core
표면 마무리	White epoxy-polyester powder coating with smooth sealed inner surfaces
접합 유형	Gasketed panel seams with electromagnetically interlocked entrance and exit door frames
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

SUS 304 internal liner12-18 directional nozzlesProgrammable cleaning cycleLeft-hand or right-hand door swing

Planning a Single-Person Cleanroom Air Shower specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.