Three-quarter view of a complete single-person cleanroom air shower

Equipement de décontamination du personnel et du matériel

Douche à air de salle blanche unique

A compact, interlocked chamber that removes loose particles from one gowned operator with directional recirculated filtered air before clean-side access.

One-Person Footprint
Directional Garment Jets
Interlocked Door Sequence
Low-Level Particle Return

Demander un devis. Browse les produits

Introduction de produit

This cleanroom air shower provides a controlled transition between a gowning room and a clean area. After entry, the door sequence holds the passage closed while sidewall nozzles direct filtered air across the operator; released lint is collected through lower return grilles before the air is recirculated. Its compact straight-through layout is intended for single-file personnel traffic where entrance space is limited.

Key Features

A narrow internal passage gives one fully gowned operator working clearance without enlarging the entrance footprint.

Adjustable nozzle rows can be aimed at sleeves, torso and lower garments.

Lower return grilles draw released particles downward rather than allowing them to settle on footwear.

A timed controller coordinates the cleaning period and the door-release sequence.

Smooth internal panels allow routine wipe-down of the occupied chamber surfaces.

Préoccupations du client produit

A single-occupant entry needs repeatable garment cleaning without consuming valuable gowning-room space or creating confusing door operation.

Sleeves and trouser legs receive little cleaning when air is supplied at one height.Multi-level adjustable sidewall nozzles can cover upper and lower garment areas.

Premature clean-side opening can disturb the controlled boundary.The interlock keeps the exit secured until the programmed cycle has ended.

A large entrance unit crowds a compact gowning room.The blower, filtration path and returns are integrated within a slim self-contained enclosure.

Released particles can circulate around the operator.Low-wall return openings collect the particle-laden airflow close to the floor.

Les applications typiques

Pharmaceutical gowning entrancesMedical-device assembly roomsElectronics cleanroom transitionsLaboratory controlled-area access

Paramètres techniques

Typical construction ranges for a compact one-person air shower are listed below.

Matériaux de base	Polyurethane-insulated powder-coated steel enclosure with stainless nozzle plates, prefilter and H13 HEPA recirculation stage
Panneau épaisseur	50 mm insulated enclosure panels
Largeur effective	800-900 mm clear internal passage width
Longueur maximale	Up to 1200 mm chamber length
Acier face épaisseur	1.0-1.2 mm formed steel sheet
Densité Core	38-45 kg/m³ closed-cell polyurethane insulation
Conductivité thermique	0.022-0.028 W/(m·K) for the insulated panel core
surface finie	White epoxy-polyester powder coating with smooth sealed inner surfaces
Type joint	Gasketed panel seams with electromagnetically interlocked entrance and exit door frames
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

SUS 304 internal liner12-18 directional nozzlesProgrammable cleaning cycleLeft-hand or right-hand door swing

Planning a Single-Person Cleanroom Air Shower specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe