Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de manuseio de ar e HVAC para sala limpa
Compressor de parafuso chiller
A medium-to-large liquid chiller using twin-rotor screw compression for robust continuous-duty cooling and smooth capacity control.
- Twin-Rotor Screw Compression
- Continuous Capacity Control
- High-Capacity Cooling
- Air- or Water-Cooled Options
Introdução do produto
The screw compressor chiller uses meshing helical rotors to compress refrigerant continuously, providing fewer capacity pulses than reciprocating machinery and reliable operation at medium and large duty. Slide-valve or variable-speed control follows changing chilled-water load, while an economizer can improve capacity at favorable operating conditions. The compressor can be paired with air-cooled condenser coils or a water-cooled shell-and-tube condenser. Oil management, discharge temperature and evaporator flow are supervised by the unit controller.
Características-chave
Slide-valve or variable-speed modulation adjusts capacity without relying only on start-stop cycling.
Economizer and liquid-injection options can support capacity and compressor temperature control.
Air-cooled and water-cooled arrangements allow the compressor platform to match the available heat sink.
Preocupações do produto do cliente
Screw chillers perform best when oil management, minimum load, water flow and condensing conditions remain within the compressor operating envelope.
Low plant load forces frequent compressor starts.Variable capacity and correctly sized system volume maintain longer stable operating cycles.
Oil remains in the evaporator during prolonged low-load operation.Oil separation, return control and minimum refrigerant velocity protect compressor lubrication.
Sudden process load changes cause chilled-water temperature excursions.Fast capacity modulation and leaving-water control respond without waiting for another compressor stage.
High discharge temperature limits operation at extreme conditions.Economizer, liquid injection or appropriate condensing control keeps the compressor within its map.
Aplicações típicas
Large cleanroom HVAC plantsSemiconductor process coolingPharmaceutical central utilitiesData and electronics facilitiesIndustrial chilled-water production
Parâmetros técnicos
Typical enclosure and compressor acoustic-lining data for a screw chiller are shown below.
| Material principal | Semi-rigid glass-fibre board inside the compressor acoustic enclosure |
|---|---|
| Painel de espessura | 1.2–2.0 mm removable compressor enclosure panels |
| Largura efetiva | 1400–3000 mm nominal equipment width |
| Comprimento máximo | Up to 12000 mm for air-cooled or 7500 mm for water-cooled configuration |
| Aço enfrentando espessura | 1.2–2.5 mm coated steel frame and service enclosure |
| Densidade Core | 48 kg/m³ semi-rigid glass-fibre acoustic board |
| Condutividade térmica | 0.033 W/(m·K) at 25°C for the glass-fibre board |
| Superfície acabado | Powder-coated structural steel and removable weather-resistant or indoor service panels |
| Tipo conjunto | Welded equipment skid with bolted acoustic panels and flanged or grooved water connections |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Fixed-speed slide-valve or variable-speed compressorAir-cooled or water-cooled condenserEconomizer, heat recovery and free coolingStandard, low-noise or ultra-low-noise package
Planning a Screw Compressor Chiller specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
