Industrial screw compressor liquid chiller

クリーンルーム HVAC および空気処理装置

スクリュー圧縮機のチラー

A medium-to-large liquid chiller using twin-rotor screw compression for robust continuous-duty cooling and smooth capacity control.

Twin-Rotor Screw Compression
Continuous Capacity Control
High-Capacity Cooling
Air- or Water-Cooled Options

見積もりリクエスト製品案内

商品紹介

The screw compressor chiller uses meshing helical rotors to compress refrigerant continuously, providing fewer capacity pulses than reciprocating machinery and reliable operation at medium and large duty. Slide-valve or variable-speed control follows changing chilled-water load, while an economizer can improve capacity at favorable operating conditions. The compressor can be paired with air-cooled condenser coils or a water-cooled shell-and-tube condenser. Oil management, discharge temperature and evaporator flow are supervised by the unit controller.

主要な特徴

Continuous rotary compression is suited to long operating hours and medium-to-large cooling loads.

Slide-valve or variable-speed modulation adjusts capacity without relying only on start-stop cycling.

Economizer and liquid-injection options can support capacity and compressor temperature control.

Air-cooled and water-cooled arrangements allow the compressor platform to match the available heat sink.

お客様の製品に関する懸念事項

Screw chillers perform best when oil management, minimum load, water flow and condensing conditions remain within the compressor operating envelope.

Low plant load forces frequent compressor starts.Variable capacity and correctly sized system volume maintain longer stable operating cycles.

Oil remains in the evaporator during prolonged low-load operation.Oil separation, return control and minimum refrigerant velocity protect compressor lubrication.

Sudden process load changes cause chilled-water temperature excursions.Fast capacity modulation and leaving-water control respond without waiting for another compressor stage.

High discharge temperature limits operation at extreme conditions.Economizer, liquid injection or appropriate condensing control keeps the compressor within its map.

典型的な用途

Large cleanroom HVAC plantsSemiconductor process coolingPharmaceutical central utilitiesData and electronics facilitiesIndustrial chilled-water production

技術的なパラメータ

Typical enclosure and compressor acoustic-lining data for a screw chiller are shown below.

コア材料	Semi-rigid glass-fibre board inside the compressor acoustic enclosure
パネルの厚さ	1.2–2.0 mm removable compressor enclosure panels
有効幅	1400–3000 mm nominal equipment width
最大長さ	Up to 12000 mm for air-cooled or 7500 mm for water-cooled configuration
鋼鉄の厚さを直面する	1.2–2.5 mm coated steel frame and service enclosure
コア密度	48 kg/m³ semi-rigid glass-fibre acoustic board
熱伝導率	0.033 W/(m·K) at 25°C for the glass-fibre board
表面仕上げ	Powder-coated structural steel and removable weather-resistant or indoor service panels
ジョイントタイプ	Welded equipment skid with bolted acoustic panels and flanged or grooved water connections
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Fixed-speed slide-valve or variable-speed compressorAir-cooled or water-cooled condenserEconomizer, heat recovery and free coolingStandard, low-noise or ultra-low-noise package

Planning a Screw Compressor Chiller specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する