Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Instrumentos de ensaio e validação de sala limpa
Tubos de Pitot
A stainless steel L-type Pitot-static tube with separate total and static pressure connections for duct velocity traverses and ventilation balancing.
- Concentric total and static pressure sensing.
- Etched depth marks for systematic duct traverses.
- Durable slender stainless construction.
Introdução do produto
This Pitot tube uses a forward-facing impact opening and circumferential static ports to develop velocity pressure without electrical sensing elements. Its slender stainless shaft enters duct access holes with limited blockage, while etched insertion marks help repeat probe depth across a traverse. Separate high and low connections attach to a micromanometer for velocity calculation.
Características-chave
Stainless construction tolerates repeated duct insertion and cleaning.
Slender shaft minimizes blockage within the measured airflow.
Etched depth marks support repeatable traverse-point positioning.
Right-angle head aligns the impact opening with duct airflow.
Separate color-coded hose connections reduce polarity mistakes.
Preocupações do produto do cliente
Accurate duct airflow measurement requires pressure sampling at prescribed depths while keeping the sensing head aligned and minimizing obstruction of the air stream.
A single centerline reading may not represent the duct average.Etched depth markings support a defined multi-point traverse across the duct area.
Probe insertion can disturb flow in a small duct.The slender shaft and compact sensing head limit blockage at each point.
Reversed pressure tubing creates invalid negative velocity pressure.Separate color-coded total and static outlets clarify the connection to the micromanometer.
Duct probes are exposed to handling and repeated cleaning.All-stainless construction provides a durable, smooth and cleanable surface.
Aplicações típicas
Supply and exhaust duct traversesCleanroom ventilation balancingAir-handler airflow verificationIndustrial exhaust testingCommissioning of high-velocity duct systems
Parâmetros técnicos
Typical stainless Pitot-static construction values are shown below; shaft length, geometry and connection tubing can be selected for duct size and process conditions.
| Material principal | Corrosion-resistant 304 stainless steel concentric pressure tubes |
|---|---|
| Painel de espessura | Typically 0.5-0.9 mm tube wall thickness |
| Largura efetiva | Approximately 6-8 mm outside diameter at the probe shaft |
| Comprimento máximo | 350-1000 mm insertion lengths available |
| Aço enfrentando espessura | Typically 0.5-0.9 mm for the stainless sensing tube wall |
| Densidade Core | Approximately 7900-8000 kg/m³ for 304 stainless steel |
| Condutividade térmica | Approximately 16-17 W/(m·K) for 304 stainless steel |
| Superfície acabado | Smooth satin stainless steel with permanently etched insertion graduations |
| Tipo conjunto | Brazed concentric Pitot-static head with separate barbed total and static pressure outlets |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
350, 500 or 1000 mm shaft lengthL-type or straight designEtched insertion scaleSilicone or silicone-free tubingCompression access fittingProtective storage tube
Planning a Pitot Tube specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
