English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Приборы для испытаний и валидации в чистых помещениях
Трубка Питота
A stainless steel L-type Pitot-static tube with separate total and static pressure connections for duct velocity traverses and ventilation balancing.
- Concentric total and static pressure sensing.
- Etched depth marks for systematic duct traverses.
- Durable slender stainless construction.
Введение продукции
This Pitot tube uses a forward-facing impact opening and circumferential static ports to develop velocity pressure without electrical sensing elements. Its slender stainless shaft enters duct access holes with limited blockage, while etched insertion marks help repeat probe depth across a traverse. Separate high and low connections attach to a micromanometer for velocity calculation.
Основные характеристики
Stainless construction tolerates repeated duct insertion and cleaning.
Slender shaft minimizes blockage within the measured airflow.
Etched depth marks support repeatable traverse-point positioning.
Right-angle head aligns the impact opening with duct airflow.
Separate color-coded hose connections reduce polarity mistakes.
Обеспокоенность клиентов продуктами
Accurate duct airflow measurement requires pressure sampling at prescribed depths while keeping the sensing head aligned and minimizing obstruction of the air stream.
A single centerline reading may not represent the duct average.Etched depth markings support a defined multi-point traverse across the duct area.
Probe insertion can disturb flow in a small duct.The slender shaft and compact sensing head limit blockage at each point.
Reversed pressure tubing creates invalid negative velocity pressure.Separate color-coded total and static outlets clarify the connection to the micromanometer.
Duct probes are exposed to handling and repeated cleaning.All-stainless construction provides a durable, smooth and cleanable surface.
Типичные приложения
Supply and exhaust duct traversesCleanroom ventilation balancingAir-handler airflow verificationIndustrial exhaust testingCommissioning of high-velocity duct systems
Технические параметры
Typical stainless Pitot-static construction values are shown below; shaft length, geometry and connection tubing can be selected for duct size and process conditions.
| Основной материал | Corrosion-resistant 304 stainless steel concentric pressure tubes |
|---|---|
| Толщина панели | Typically 0.5-0.9 mm tube wall thickness |
| эффективная ширина | Approximately 6-8 mm outside diameter at the probe shaft |
| Максимальная длина | 350-1000 mm insertion lengths available |
| Толщина линий стали | Typically 0.5-0.9 mm for the stainless sensing tube wall |
| Плотность ядра | Approximately 7900-8000 kg/m³ for 304 stainless steel |
| Теплопроводимость | Approximately 16-17 W/(m·K) for 304 stainless steel |
| Поверхностная отделка | Smooth satin stainless steel with permanently etched insertion graduations |
| Объединенный тип | Brazed concentric Pitot-static head with separate barbed total and static pressure outlets |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
350, 500 or 1000 mm shaft lengthL-type or straight designEtched insertion scaleSilicone or silicone-free tubingCompression access fittingProtective storage tube
Planning a Pitot Tube specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
