Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Instrumentación de prueba y validación de sala limpia
Pitot Tube
A stainless steel L-type Pitot-static tube with separate total and static pressure connections for duct velocity traverses and ventilation balancing.
- Concentric total and static pressure sensing.
- Etched depth marks for systematic duct traverses.
- Durable slender stainless construction.
Introducción del producto
This Pitot tube uses a forward-facing impact opening and circumferential static ports to develop velocity pressure without electrical sensing elements. Its slender stainless shaft enters duct access holes with limited blockage, while etched insertion marks help repeat probe depth across a traverse. Separate high and low connections attach to a micromanometer for velocity calculation.
Características clave
Stainless construction tolerates repeated duct insertion and cleaning.
Slender shaft minimizes blockage within the measured airflow.
Etched depth marks support repeatable traverse-point positioning.
Right-angle head aligns the impact opening with duct airflow.
Separate color-coded hose connections reduce polarity mistakes.
Preocupaciones del producto del cliente
Accurate duct airflow measurement requires pressure sampling at prescribed depths while keeping the sensing head aligned and minimizing obstruction of the air stream.
A single centerline reading may not represent the duct average.Etched depth markings support a defined multi-point traverse across the duct area.
Probe insertion can disturb flow in a small duct.The slender shaft and compact sensing head limit blockage at each point.
Reversed pressure tubing creates invalid negative velocity pressure.Separate color-coded total and static outlets clarify the connection to the micromanometer.
Duct probes are exposed to handling and repeated cleaning.All-stainless construction provides a durable, smooth and cleanable surface.
Aplicaciones típicas
Supply and exhaust duct traversesCleanroom ventilation balancingAir-handler airflow verificationIndustrial exhaust testingCommissioning of high-velocity duct systems
Parámetros técnicos
Typical stainless Pitot-static construction values are shown below; shaft length, geometry and connection tubing can be selected for duct size and process conditions.
| Materiales Core | Corrosion-resistant 304 stainless steel concentric pressure tubes |
|---|---|
| Panel de espesor | Typically 0.5-0.9 mm tube wall thickness |
| Ancho efectivo | Approximately 6-8 mm outside diameter at the probe shaft |
| Longitud máxima | 350-1000 mm insertion lengths available |
| Acero frente a espesor | Typically 0.5-0.9 mm for the stainless sensing tube wall |
| Densidad Core | Approximately 7900-8000 kg/m³ for 304 stainless steel |
| Conductividad térmica | Approximately 16-17 W/(m·K) for 304 stainless steel |
| Superficie acabada | Smooth satin stainless steel with permanently etched insertion graduations |
| Tipo conjunto | Brazed concentric Pitot-static head with separate barbed total and static pressure outlets |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
350, 500 or 1000 mm shaft lengthL-type or straight designEtched insertion scaleSilicone or silicone-free tubingCompression access fittingProtective storage tube
Planning a Pitot Tube specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
