Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de sala limpa Peças de reposição
Pass Box Lâmpada UV
A compact UV-C lamp and stainless mounting reflector for restoring the timed irradiation function of a compatible cleanroom pass box.
- Complete Lamp Assembly
- Quartz UV-C Tube
- Stainless Mounting Trough
- Service-Ready Wiring
Introdução do produto
The pass box UV lamp is a replaceable irradiation assembly installed inside a compatible transfer chamber. A low-pressure UV-C tube is supported by heat-resistant ceramic holders on a shallow stainless-steel trough that also provides a stable mounting surface. The reflector, tube length, holder spacing, supply cable and ballast requirements must match the original equipment. UV-C output is invisible and potentially hazardous, so the lamp is intended for an enclosed, interlocked cycle that prevents personnel exposure while the chamber is operating.
Características-chave
Ceramic end holders provide stable support near the lamp terminals during repeated operating cycles.
The formed stainless trough combines mounting, protection and directional reflection in one serviceable part.
A short color-coded lead simplifies connection to the existing pass box control circuit when specifications match.
Preocupações do produto do cliente
Successful replacement depends on matching the mechanical envelope, electrical control gear and enclosed safety interlock of the original pass box.
A tube with the wrong length or terminal spacing will not seat correctly in the existing holders.Overall tube length, holder center distance and end connection are matched to the original lamp assembly before supply.
An incompatible ballast or supply circuit can reduce output or shorten lamp life.Lamp wattage, operating current and control-gear type are selected as a coordinated electrical set.
Unshielded UV-C operation creates an exposure hazard when a chamber door is opened.The replacement is used only with a functioning door interlock, enclosure and timed control sequence.
Dust or residue on the tube and reflector reduces delivered irradiance inside the chamber.The accessible trough and removable tube support scheduled inspection and cleaning with compatible procedures.
Aplicações típicas
Static pass box UV-C modulesDynamic transfer chamber lamp replacementLaboratory material hatch irradiationEnclosed cleanroom pass-through disinfection cycles
Parâmetros técnicos
Typical construction and envelope ranges for enclosed pass box UV-C replacement lamp assemblies are listed below.
| Material principal | Low-pressure UV-C discharge tube in quartz glass with ceramic holders and stainless mounting trough |
|---|---|
| Painel de espessura | 1.0-1.5 mm formed stainless trough wall |
| Largura efetiva | 45-80 mm nominal reflector and mounting width |
| Comprimento máximo | Up to 900 mm overall assembly length |
| Aço enfrentando espessura | 1.0-1.5 mm stainless-steel reflector thickness |
| Densidade Core | Approximately 2200 kg/m³ for quartz glass tube material |
| Condutividade térmica | 1.1-1.4 W/(m·K) for fused quartz tube material |
| Superfície acabado | Satin stainless trough, white ceramic holders and clear to pale-blue quartz tube |
| Tipo conjunto | Double-ended tube retained by two ceramic holders with hardwired cable exit |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Matched lamp wattageAlternative assembly lengthBallast-compatible wiringCustom mounting-ear spacing
Planning a Pass Box UV Lamp specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
