日本語
ドイツ人。
アラビア語：アラビア語
フランス語で
インドネシア語
日本語で。流れ
韓国語
マレー語
ポルトガル語
ロシア語
スペイン語
タイ語
トルコ語
ベトナム語
商品紹介
The pass box UV lamp is a replaceable irradiation assembly installed inside a compatible transfer chamber. A low-pressure UV-C tube is supported by heat-resistant ceramic holders on a shallow stainless-steel trough that also provides a stable mounting surface. The reflector, tube length, holder spacing, supply cable and ballast requirements must match the original equipment. UV-C output is invisible and potentially hazardous, so the lamp is intended for an enclosed, interlocked cycle that prevents personnel exposure while the chamber is operating.
主要な特徴
Ceramic end holders provide stable support near the lamp terminals during repeated operating cycles.
The formed stainless trough combines mounting, protection and directional reflection in one serviceable part.
A short color-coded lead simplifies connection to the existing pass box control circuit when specifications match.
お客様の製品に関する懸念事項
Successful replacement depends on matching the mechanical envelope, electrical control gear and enclosed safety interlock of the original pass box.
A tube with the wrong length or terminal spacing will not seat correctly in the existing holders.Overall tube length, holder center distance and end connection are matched to the original lamp assembly before supply.
An incompatible ballast or supply circuit can reduce output or shorten lamp life.Lamp wattage, operating current and control-gear type are selected as a coordinated electrical set.
Unshielded UV-C operation creates an exposure hazard when a chamber door is opened.The replacement is used only with a functioning door interlock, enclosure and timed control sequence.
Dust or residue on the tube and reflector reduces delivered irradiance inside the chamber.The accessible trough and removable tube support scheduled inspection and cleaning with compatible procedures.
典型的な用途
Static pass box UV-C modulesDynamic transfer chamber lamp replacementLaboratory material hatch irradiationEnclosed cleanroom pass-through disinfection cycles
技術的なパラメータ
Typical construction and envelope ranges for enclosed pass box UV-C replacement lamp assemblies are listed below.
| コア材料 | Low-pressure UV-C discharge tube in quartz glass with ceramic holders and stainless mounting trough |
|---|---|
| パネルの厚さ | 1.0-1.5 mm formed stainless trough wall |
| 有効幅 | 45-80 mm nominal reflector and mounting width |
| 最大長さ | Up to 900 mm overall assembly length |
| 鋼鉄の厚さを直面する | 1.0-1.5 mm stainless-steel reflector thickness |
| コア密度 | Approximately 2200 kg/m³ for quartz glass tube material |
| 熱伝導率 | 1.1-1.4 W/(m·K) for fused quartz tube material |
| 表面仕上げ | Satin stainless trough, white ceramic holders and clear to pale-blue quartz tube |
| ジョイントタイプ | Double-ended tube retained by two ceramic holders with hardwired cable exit |
| カスタマイズ | 意図したアプリケーションと動作環境に基づいて利用できます。 |
利用可能なオプション
Matched lamp wattageAlternative assembly lengthBallast-compatible wiringCustom mounting-ear spacing
Planning a Pass Box UV Lamp specification?
寸法、設置条件、性能目標、必要な表面仕上げをお送りください。
