영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어
상품 소개
The pass box UV lamp is a replaceable irradiation assembly installed inside a compatible transfer chamber. A low-pressure UV-C tube is supported by heat-resistant ceramic holders on a shallow stainless-steel trough that also provides a stable mounting surface. The reflector, tube length, holder spacing, supply cable and ballast requirements must match the original equipment. UV-C output is invisible and potentially hazardous, so the lamp is intended for an enclosed, interlocked cycle that prevents personnel exposure while the chamber is operating.
주요 기능
Ceramic end holders provide stable support near the lamp terminals during repeated operating cycles.
The formed stainless trough combines mounting, protection and directional reflection in one serviceable part.
A short color-coded lead simplifies connection to the existing pass box control circuit when specifications match.
고객 제품 관심사
Successful replacement depends on matching the mechanical envelope, electrical control gear and enclosed safety interlock of the original pass box.
A tube with the wrong length or terminal spacing will not seat correctly in the existing holders.Overall tube length, holder center distance and end connection are matched to the original lamp assembly before supply.
An incompatible ballast or supply circuit can reduce output or shorten lamp life.Lamp wattage, operating current and control-gear type are selected as a coordinated electrical set.
Unshielded UV-C operation creates an exposure hazard when a chamber door is opened.The replacement is used only with a functioning door interlock, enclosure and timed control sequence.
Dust or residue on the tube and reflector reduces delivered irradiance inside the chamber.The accessible trough and removable tube support scheduled inspection and cleaning with compatible procedures.
일반적인 응용 프로그램
Static pass box UV-C modulesDynamic transfer chamber lamp replacementLaboratory material hatch irradiationEnclosed cleanroom pass-through disinfection cycles
기술 매개변수
Typical construction and envelope ranges for enclosed pass box UV-C replacement lamp assemblies are listed below.
| 핵심 재료 | Low-pressure UV-C discharge tube in quartz glass with ceramic holders and stainless mounting trough |
|---|---|
| 패널 두께 | 1.0-1.5 mm formed stainless trough wall |
| 유효 폭 | 45-80 mm nominal reflector and mounting width |
| 최대 길이 | Up to 900 mm overall assembly length |
| 강철 면면 두께 | 1.0-1.5 mm stainless-steel reflector thickness |
| 코어 밀도 | Approximately 2200 kg/m³ for quartz glass tube material |
| 열전도도 (Thermal Conductivity) | 1.1-1.4 W/(m·K) for fused quartz tube material |
| 표면 마무리 | Satin stainless trough, white ceramic holders and clear to pale-blue quartz tube |
| 접합 유형 | Double-ended tube retained by two ceramic holders with hardwired cable exit |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
사용 가능한 옵션
Matched lamp wattageAlternative assembly lengthBallast-compatible wiringCustom mounting-ear spacing
Planning a Pass Box UV Lamp specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.
