Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de sala limpia piezas de repuesto
Lámpara UV de caja
A compact UV-C lamp and stainless mounting reflector for restoring the timed irradiation function of a compatible cleanroom pass box.
- Complete Lamp Assembly
- Quartz UV-C Tube
- Stainless Mounting Trough
- Service-Ready Wiring
Introducción del producto
The pass box UV lamp is a replaceable irradiation assembly installed inside a compatible transfer chamber. A low-pressure UV-C tube is supported by heat-resistant ceramic holders on a shallow stainless-steel trough that also provides a stable mounting surface. The reflector, tube length, holder spacing, supply cable and ballast requirements must match the original equipment. UV-C output is invisible and potentially hazardous, so the lamp is intended for an enclosed, interlocked cycle that prevents personnel exposure while the chamber is operating.
Características clave
Ceramic end holders provide stable support near the lamp terminals during repeated operating cycles.
The formed stainless trough combines mounting, protection and directional reflection in one serviceable part.
A short color-coded lead simplifies connection to the existing pass box control circuit when specifications match.
Preocupaciones del producto del cliente
Successful replacement depends on matching the mechanical envelope, electrical control gear and enclosed safety interlock of the original pass box.
A tube with the wrong length or terminal spacing will not seat correctly in the existing holders.Overall tube length, holder center distance and end connection are matched to the original lamp assembly before supply.
An incompatible ballast or supply circuit can reduce output or shorten lamp life.Lamp wattage, operating current and control-gear type are selected as a coordinated electrical set.
Unshielded UV-C operation creates an exposure hazard when a chamber door is opened.The replacement is used only with a functioning door interlock, enclosure and timed control sequence.
Dust or residue on the tube and reflector reduces delivered irradiance inside the chamber.The accessible trough and removable tube support scheduled inspection and cleaning with compatible procedures.
Aplicaciones típicas
Static pass box UV-C modulesDynamic transfer chamber lamp replacementLaboratory material hatch irradiationEnclosed cleanroom pass-through disinfection cycles
Parámetros técnicos
Typical construction and envelope ranges for enclosed pass box UV-C replacement lamp assemblies are listed below.
| Materiales Core | Low-pressure UV-C discharge tube in quartz glass with ceramic holders and stainless mounting trough |
|---|---|
| Panel de espesor | 1.0-1.5 mm formed stainless trough wall |
| Ancho efectivo | 45-80 mm nominal reflector and mounting width |
| Longitud máxima | Up to 900 mm overall assembly length |
| Acero frente a espesor | 1.0-1.5 mm stainless-steel reflector thickness |
| Densidad Core | Approximately 2200 kg/m³ for quartz glass tube material |
| Conductividad térmica | 1.1-1.4 W/(m·K) for fused quartz tube material |
| Superficie acabada | Satin stainless trough, white ceramic holders and clear to pale-blue quartz tube |
| Tipo conjunto | Double-ended tube retained by two ceramic holders with hardwired cable exit |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Matched lamp wattageAlternative assembly lengthBallast-compatible wiringCustom mounting-ear spacing
Planning a Pass Box UV Lamp specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
