Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de Utilidade de Cleanroom
Sistema de saneamento de ozônio
An integrated skid that generates ozone on demand, mixes it into process water and monitors residual concentration for controlled cold sanitization.
- On-demand ozone generation
- Monitored residual concentration
- Stainless contact and mixing path
Introdução do produto
The ozone sanitization system combines oxygen preparation, corona-discharge ozone generation, controlled gas dosing, water-side mixing and residual monitoring. Ozone is produced at the point of use and transferred through a stainless contact path to sanitize storage and distribution equipment without leaving a persistent chemical residue.
Características-chave
Oxygen feed preparation
Stainless injector and static mixing loop
Contact vessel
Dissolved ozone monitoring
Off-gas connection
Flow or residual-based output control
Integrated HMI and safety interlocks
Preocupações do produto do cliente
Stable ozone sanitization requires controlled gas production, efficient dissolution, adequate contact time and verified removal before sensitive points of use.
Ozone transfer into water is inconsistentUse a sized injector and static mixing section matched to water flow and backpressure.
Residual concentration is unknownMeasure dissolved ozone continuously and modulate generator output from the selected setpoint.
Undissolved ozone accumulates in equipmentProvide a defined off-gas path and compatible ozone destructor where required.
Residual ozone reaches downstream processesCoordinate sanitization timing and apply a suitable UV ozone-destruction step before use.
Aplicações típicas
Purified Water tank sanitizationPharmaceutical distribution loopsBeverage process-water treatmentCosmetic manufacturing waterCold sanitization of hygienic vessels
Parâmetros técnicos
Generator capacity, oxygen feed, mixer, contact volume and instrumentation are selected from water flow, ozone demand and sanitization cycle.
| Material principal | 316L stainless steel wetted piping and contact vessel with ozone-compatible seals |
|---|---|
| Painel de espessura | Contact vessel wall typically 2.0–6.0 mm |
| Largura efetiva | Skid width typically 800–1800 mm |
| Comprimento máximo | Complete skid height or length typically up to 2600 mm |
| Aço enfrentando espessura | Generator enclosure and skid sheet typically 1.5–3.0 mm |
| Densidade Core | 316L stainless steel density approximately 8000 kg/m³ |
| Condutividade térmica | 316L stainless steel approximately 15 W/(m·K) at ambient temperature |
| Superfície acabado | Polished wetted stainless surfaces with satin skid and powder-coated generator cabinet |
| Tipo conjunto | Sanitary-clamp or orbital-weld water path with ozone-rated compression tubing on the gas side |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Oxygen concentrator or oxygen supply interfaceDissolved ozone sensorOff-gas destructorContact tank sizeUV ozone destruction integrationRemote communicationStainless generator enclosure
Planning a Ozone Sanitization System specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
