İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Hizmet Sistemi
Ozon Sanitizasyon Sistemi
An integrated skid that generates ozone on demand, mixes it into process water and monitors residual concentration for controlled cold sanitization.
- On-demand ozone generation
- Monitored residual concentration
- Stainless contact and mixing path
Ürün tanıtımı
The ozone sanitization system combines oxygen preparation, corona-discharge ozone generation, controlled gas dosing, water-side mixing and residual monitoring. Ozone is produced at the point of use and transferred through a stainless contact path to sanitize storage and distribution equipment without leaving a persistent chemical residue.
Ana Özellikler
Oxygen feed preparation
Stainless injector and static mixing loop
Contact vessel
Dissolved ozone monitoring
Off-gas connection
Flow or residual-based output control
Integrated HMI and safety interlocks
Müşteri Ürün Sorunları
Stable ozone sanitization requires controlled gas production, efficient dissolution, adequate contact time and verified removal before sensitive points of use.
Ozone transfer into water is inconsistentUse a sized injector and static mixing section matched to water flow and backpressure.
Residual concentration is unknownMeasure dissolved ozone continuously and modulate generator output from the selected setpoint.
Undissolved ozone accumulates in equipmentProvide a defined off-gas path and compatible ozone destructor where required.
Residual ozone reaches downstream processesCoordinate sanitization timing and apply a suitable UV ozone-destruction step before use.
Tipik uygulamalar
Purified Water tank sanitizationPharmaceutical distribution loopsBeverage process-water treatmentCosmetic manufacturing waterCold sanitization of hygienic vessels
Teknik parametreler
Generator capacity, oxygen feed, mixer, contact volume and instrumentation are selected from water flow, ozone demand and sanitization cycle.
| Temel malzemeler | 316L stainless steel wetted piping and contact vessel with ozone-compatible seals |
|---|---|
| Panel kalınlığı | Contact vessel wall typically 2.0–6.0 mm |
| Effective Width (Etkili Genişlik) | Skid width typically 800–1800 mm |
| Maksimum uzunluk | Complete skid height or length typically up to 2600 mm |
| Çelik yüz yüze kalınlığı | Generator enclosure and skid sheet typically 1.5–3.0 mm |
| Core Density (Çekirdek Yoğunluğu) | 316L stainless steel density approximately 8000 kg/m³ |
| Termal İletkenlik | 316L stainless steel approximately 15 W/(m·K) at ambient temperature |
| Yüzey bitirme | Polished wetted stainless surfaces with satin skid and powder-coated generator cabinet |
| Ortak tip | Sanitary-clamp or orbital-weld water path with ozone-rated compression tubing on the gas side |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Oxygen concentrator or oxygen supply interfaceDissolved ozone sensorOff-gas destructorContact tank sizeUV ozone destruction integrationRemote communicationStainless generator enclosure
Planning a Ozone Sanitization System specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
