English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Утилитарные системы для чистых помещений
Система озонной санитарии
An integrated skid that generates ozone on demand, mixes it into process water and monitors residual concentration for controlled cold sanitization.
- On-demand ozone generation
- Monitored residual concentration
- Stainless contact and mixing path
Введение продукции
The ozone sanitization system combines oxygen preparation, corona-discharge ozone generation, controlled gas dosing, water-side mixing and residual monitoring. Ozone is produced at the point of use and transferred through a stainless contact path to sanitize storage and distribution equipment without leaving a persistent chemical residue.
Основные характеристики
Oxygen feed preparation
Stainless injector and static mixing loop
Contact vessel
Dissolved ozone monitoring
Off-gas connection
Flow or residual-based output control
Integrated HMI and safety interlocks
Обеспокоенность клиентов продуктами
Stable ozone sanitization requires controlled gas production, efficient dissolution, adequate contact time and verified removal before sensitive points of use.
Ozone transfer into water is inconsistentUse a sized injector and static mixing section matched to water flow and backpressure.
Residual concentration is unknownMeasure dissolved ozone continuously and modulate generator output from the selected setpoint.
Undissolved ozone accumulates in equipmentProvide a defined off-gas path and compatible ozone destructor where required.
Residual ozone reaches downstream processesCoordinate sanitization timing and apply a suitable UV ozone-destruction step before use.
Типичные приложения
Purified Water tank sanitizationPharmaceutical distribution loopsBeverage process-water treatmentCosmetic manufacturing waterCold sanitization of hygienic vessels
Технические параметры
Generator capacity, oxygen feed, mixer, contact volume and instrumentation are selected from water flow, ozone demand and sanitization cycle.
| Основной материал | 316L stainless steel wetted piping and contact vessel with ozone-compatible seals |
|---|---|
| Толщина панели | Contact vessel wall typically 2.0–6.0 mm |
| эффективная ширина | Skid width typically 800–1800 mm |
| Максимальная длина | Complete skid height or length typically up to 2600 mm |
| Толщина линий стали | Generator enclosure and skid sheet typically 1.5–3.0 mm |
| Плотность ядра | 316L stainless steel density approximately 8000 kg/m³ |
| Теплопроводимость | 316L stainless steel approximately 15 W/(m·K) at ambient temperature |
| Поверхностная отделка | Polished wetted stainless surfaces with satin skid and powder-coated generator cabinet |
| Объединенный тип | Sanitary-clamp or orbital-weld water path with ozone-rated compression tubing on the gas side |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Oxygen concentrator or oxygen supply interfaceDissolved ozone sensorOff-gas destructorContact tank sizeUV ozone destruction integrationRemote communicationStainless generator enclosure
Planning a Ozone Sanitization System specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
