Ozone sanitization system three-quarter view with generator and contact vessel

Sistem Utiliti Bilik Bersih

Sistem Pembersihan Ozon

An integrated skid that generates ozone on demand, mixes it into process water and monitors residual concentration for controlled cold sanitization.

On-demand ozone generation
Monitored residual concentration
Stainless contact and mixing path

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The ozone sanitization system combines oxygen preparation, corona-discharge ozone generation, controlled gas dosing, water-side mixing and residual monitoring. Ozone is produced at the point of use and transferred through a stainless contact path to sanitize storage and distribution equipment without leaving a persistent chemical residue.

Ciri-ciri Utama

On-site corona-discharge ozone generator

Oxygen feed preparation

Stainless injector and static mixing loop

Contact vessel

Dissolved ozone monitoring

Off-gas connection

Flow or residual-based output control

Integrated HMI and safety interlocks

Kebimbangan Produk Pelanggan

Stable ozone sanitization requires controlled gas production, efficient dissolution, adequate contact time and verified removal before sensitive points of use.

Ozone transfer into water is inconsistentUse a sized injector and static mixing section matched to water flow and backpressure.

Residual concentration is unknownMeasure dissolved ozone continuously and modulate generator output from the selected setpoint.

Undissolved ozone accumulates in equipmentProvide a defined off-gas path and compatible ozone destructor where required.

Residual ozone reaches downstream processesCoordinate sanitization timing and apply a suitable UV ozone-destruction step before use.

Permohonan yang biasa

Purified Water tank sanitizationPharmaceutical distribution loopsBeverage process-water treatmentCosmetic manufacturing waterCold sanitization of hygienic vessels

Parameter teknikal

Generator capacity, oxygen feed, mixer, contact volume and instrumentation are selected from water flow, ozone demand and sanitization cycle.

Bahan Teras	316L stainless steel wetted piping and contact vessel with ozone-compatible seals
Ketebalan Panel	Contact vessel wall typically 2.0–6.0 mm
Lebar berkesan	Skid width typically 800–1800 mm
Panjang maksimum	Complete skid height or length typically up to 2600 mm
Keluli Menghadapi Ketebalan	Generator enclosure and skid sheet typically 1.5–3.0 mm
Ketumpatan teras	316L stainless steel density approximately 8000 kg/m³
Kekonduksian Terma	316L stainless steel approximately 15 W/(m·K) at ambient temperature
Kemasan permukaan	Polished wetted stainless surfaces with satin skid and powder-coated generator cabinet
Jenis Bersatu	Sanitary-clamp or orbital-weld water path with ozone-rated compression tubing on the gas side
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Oxygen concentrator or oxygen supply interfaceDissolved ozone sensorOff-gas destructorContact tank sizeUV ozone destruction integrationRemote communicationStainless generator enclosure

Planning a Ozone Sanitization System specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami