Controle de sala limpa e sistemas de monitoramento ambiental

Sensor de ocupação

A low-profile ceiling or wall sensor that detects room use for lighting control, airflow setback and occupancy status without requiring user contact.

PIR or Dual-Technology Detection
Low-Profile Ceiling Housing
Adjustable Time Delay
Lighting and HVAC Outputs

Solicite um orçamento. Browse produtos

Introdução do produto

The cleanroom occupancy sensor detects motion or presence using passive infrared, ultrasonic or combined technology. A smooth, low-profile housing limits exposed ledges while the optical lens covers the selected room area. Adjustable sensitivity, timeout and daylight interaction prevent brief absence from switching controlled systems too aggressively. Dry-contact, low-voltage or network output can command lighting, signal room-use status or request a defined HVAC setback mode while critical minimum ventilation remains under the primary airflow controls.

Características-chave

PIR or dual-technology sensing adapts to room size and expected occupant movement.

A shallow sealed-looking enclosure suits clean ceilings and exposed cleanroom walls.

Configurable timeout avoids rapid switching during short periods of limited movement.

Separate lighting and occupancy outputs support coordinated but independent control actions.

Preocupações do produto do cliente

Occupancy sensing must cover the actual work area without reacting through doorways or reducing critical cleanroom ventilation below safe minimums.

A sensor turns lights off while a seated operator makes little movement.Dual-technology detection and suitable sensitivity improve presence recognition.

Movement in the corridor triggers an empty cleanroom.Coverage masking and considered mounting keep the detection field inside the intended room.

A short absence causes unnecessary airflow and lighting cycling.Adjustable delay holds the occupied state through brief departures.

An occupancy command overrides the minimum cleanroom air-change requirement.The sensor requests only a defined setback mode while minimum airflow limits remain in the HVAC controller.

Aplicações típicas

Occupancy-based cleanroom lighting controlAirflow setback requestsLaboratory occupancy statusClean corridor lighting

Parâmetros técnicos

Typical materials and dimensions for a low-profile cleanroom occupancy sensor are shown below.

Material principal	Pyroelectric PIR element with Fresnel lens in flame-retardant polycarbonate housing
Painel de espessura	30-55 mm sensor depth
Largura efetiva	90-140 mm sensor diameter or width
Comprimento máximo	Up to 160 mm housing dimension
Aço enfrentando espessura	0 mm; non-metallic ceiling or wall enclosure
Densidade Core	1180-1220 kg/m³ for polycarbonate housing
Condutividade térmica	0.19-0.22 W/(m·K) for polycarbonate enclosure material
Superfície acabado	Matte white low-profile housing with translucent white optical lens
Tipo conjunto	Twist-lock ceiling base or wall bracket with pluggable control terminal
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

PIR or dual-technology sensingCeiling or wall mountingDry contact or network outputDaylight hold-off input

Planning a Occupancy Sensor specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe