Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Control de salas limpias y sistemas de monitoreo ambiental
Sensor de ocupación
A low-profile ceiling or wall sensor that detects room use for lighting control, airflow setback and occupancy status without requiring user contact.
- PIR or Dual-Technology Detection
- Low-Profile Ceiling Housing
- Adjustable Time Delay
- Lighting and HVAC Outputs
Introducción del producto
The cleanroom occupancy sensor detects motion or presence using passive infrared, ultrasonic or combined technology. A smooth, low-profile housing limits exposed ledges while the optical lens covers the selected room area. Adjustable sensitivity, timeout and daylight interaction prevent brief absence from switching controlled systems too aggressively. Dry-contact, low-voltage or network output can command lighting, signal room-use status or request a defined HVAC setback mode while critical minimum ventilation remains under the primary airflow controls.
Características clave
A shallow sealed-looking enclosure suits clean ceilings and exposed cleanroom walls.
Configurable timeout avoids rapid switching during short periods of limited movement.
Separate lighting and occupancy outputs support coordinated but independent control actions.
Preocupaciones del producto del cliente
Occupancy sensing must cover the actual work area without reacting through doorways or reducing critical cleanroom ventilation below safe minimums.
A sensor turns lights off while a seated operator makes little movement.Dual-technology detection and suitable sensitivity improve presence recognition.
Movement in the corridor triggers an empty cleanroom.Coverage masking and considered mounting keep the detection field inside the intended room.
A short absence causes unnecessary airflow and lighting cycling.Adjustable delay holds the occupied state through brief departures.
An occupancy command overrides the minimum cleanroom air-change requirement.The sensor requests only a defined setback mode while minimum airflow limits remain in the HVAC controller.
Aplicaciones típicas
Occupancy-based cleanroom lighting controlAirflow setback requestsLaboratory occupancy statusClean corridor lighting
Parámetros técnicos
Typical materials and dimensions for a low-profile cleanroom occupancy sensor are shown below.
| Materiales Core | Pyroelectric PIR element with Fresnel lens in flame-retardant polycarbonate housing |
|---|---|
| Panel de espesor | 30-55 mm sensor depth |
| Ancho efectivo | 90-140 mm sensor diameter or width |
| Longitud máxima | Up to 160 mm housing dimension |
| Acero frente a espesor | 0 mm; non-metallic ceiling or wall enclosure |
| Densidad Core | 1180-1220 kg/m³ for polycarbonate housing |
| Conductividad térmica | 0.19-0.22 W/(m·K) for polycarbonate enclosure material |
| Superficie acabada | Matte white low-profile housing with translucent white optical lens |
| Tipo conjunto | Twist-lock ceiling base or wall bracket with pluggable control terminal |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
PIR or dual-technology sensingCeiling or wall mountingDry contact or network outputDaylight hold-off input
Planning a Occupancy Sensor specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
