Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Kontrol Cleanroom dan Sistem Pemantauan Lingkungan
Sensor Penghunian
A low-profile ceiling or wall sensor that detects room use for lighting control, airflow setback and occupancy status without requiring user contact.
- PIR or Dual-Technology Detection
- Low-Profile Ceiling Housing
- Adjustable Time Delay
- Lighting and HVAC Outputs
Perkenalan produk
The cleanroom occupancy sensor detects motion or presence using passive infrared, ultrasonic or combined technology. A smooth, low-profile housing limits exposed ledges while the optical lens covers the selected room area. Adjustable sensitivity, timeout and daylight interaction prevent brief absence from switching controlled systems too aggressively. Dry-contact, low-voltage or network output can command lighting, signal room-use status or request a defined HVAC setback mode while critical minimum ventilation remains under the primary airflow controls.
Fitur utama:
A shallow sealed-looking enclosure suits clean ceilings and exposed cleanroom walls.
Configurable timeout avoids rapid switching during short periods of limited movement.
Separate lighting and occupancy outputs support coordinated but independent control actions.
Kekhawatiran produk pelanggan
Occupancy sensing must cover the actual work area without reacting through doorways or reducing critical cleanroom ventilation below safe minimums.
A sensor turns lights off while a seated operator makes little movement.Dual-technology detection and suitable sensitivity improve presence recognition.
Movement in the corridor triggers an empty cleanroom.Coverage masking and considered mounting keep the detection field inside the intended room.
A short absence causes unnecessary airflow and lighting cycling.Adjustable delay holds the occupied state through brief departures.
An occupancy command overrides the minimum cleanroom air-change requirement.The sensor requests only a defined setback mode while minimum airflow limits remain in the HVAC controller.
Aplikasi yang Tipis
Occupancy-based cleanroom lighting controlAirflow setback requestsLaboratory occupancy statusClean corridor lighting
Parameter teknis
Typical materials and dimensions for a low-profile cleanroom occupancy sensor are shown below.
| Bahan inti | Pyroelectric PIR element with Fresnel lens in flame-retardant polycarbonate housing |
|---|---|
| Ketebalan Panel (Panel Thickness) | 30-55 mm sensor depth |
| Efektif lebar | 90-140 mm sensor diameter or width |
| Panjang maksimum | Up to 160 mm housing dimension |
| Baja menghadap ketebalan | 0 mm; non-metallic ceiling or wall enclosure |
| Kepadatan inti (core density) | 1180-1220 kg/m³ for polycarbonate housing |
| Konduktivitas Termal (Thermal Conductivity) | 0.19-0.22 W/(m·K) for polycarbonate enclosure material |
| Permukaan selesai | Matte white low-profile housing with translucent white optical lens |
| Jenis Bersama | Twist-lock ceiling base or wall bracket with pluggable control terminal |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
PIR or dual-technology sensingCeiling or wall mountingDry contact or network outputDaylight hold-off input
Planning a Occupancy Sensor specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
