Mobile transfer isolator with sealed chamber and docking interface

Fluxo laminar e equipamentos de contenção

Isolador de transferência móvel

A sealed wheeled barrier chamber that protects materials during movement and docks to compatible process equipment or transfer ports at the destination.

Sealed Mobile Chamber
Battery-Supported Air Handling
Process Docking Interface
Glove-Assisted Transfer

Solicite um orçamento. Browse produtos

Introdução do produto

The mobile transfer isolator carries sterile or contained items inside a pressure-controlled chamber mounted on a low-vibration caster chassis. An onboard battery can maintain filtration and chamber pressure while the unit is disconnected from facility power. At the destination, a docking cone, rapid transfer port or gasketed door connects the chamber to compatible equipment. Glove ports allow final positioning without opening the barrier, and brakes plus leveling pads stabilize the isolator before transfer.

Características-chave

A sealed chamber protects contents throughout movement between process locations.

Onboard battery power can maintain the selected air-handling mode during transit.

A guided docking interface aligns the mobile chamber with the receiving equipment.

Glove access supports final manipulation after the isolator is docked.

Four-point braking and leveling secure the chassis during connection.

Preocupações do produto do cliente

A mobile barrier must keep pressure and filtration stable during movement, then dock without creating a new open transfer step.

Filtration stops when the unit is unplugged.An onboard battery maintains the blower and controls for the planned transfer period.

The mobile chamber is difficult to align with the process port.Guide pins, bumpers and adjustable leveling support repeatable docking.

Opening a door at the destination breaks the barrier.A rapid transfer port or double-door docking interface preserves the closed path.

Caster movement strains the dock seal.Brakes and leveling feet carry the chassis load before the connection is opened.

Aplicações típicas

Sterile component transferContained sample transportMovement between isolators and filling linesProtected transfer through lower-grade corridors

Parâmetros técnicos

Typical configurable construction ranges for a mobile transfer isolator are listed below.

Material principal	Welded SUS316L mobile chamber with safety glass, glove ports and a reinforced stainless caster chassis
Painel de espessura	40-80 mm double-skin chamber and fan sections
Largura efetiva	600-1400 mm usable transfer width
Comprimento máximo	Up to 2500 mm overall mobile length
Aço enfrentando espessura	1.5-2.5 mm SUS316L chamber; 2.0-3.0 mm chassis members
Densidade Core	Approximately 8000 kg/m³ for SUS316L structural material
Condutividade térmica	14-16 W/(m·K) for austenitic stainless steel
Superfície acabado	Fine-brushed or electropolished SUS316L with cleanroom-compatible non-shedding casters
Tipo conjunto	Pressure-tight welded chamber with gasketed docking interface, sealed glove rings and bolted caster chassis
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Positive- or negative-pressure modeBattery and charging systemRapid transfer or gasketed docking portInternal shelves and retention rails

Planning a Mobile Transfer Isolator specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe