Mobile transfer isolator with sealed chamber and docking interface

層流 · 封じ込め装置

Mobile 転送アイソレータ

A sealed wheeled barrier chamber that protects materials during movement and docks to compatible process equipment or transfer ports at the destination.

Sealed Mobile Chamber
Battery-Supported Air Handling
Process Docking Interface
Glove-Assisted Transfer

見積もりリクエスト製品案内

商品紹介

The mobile transfer isolator carries sterile or contained items inside a pressure-controlled chamber mounted on a low-vibration caster chassis. An onboard battery can maintain filtration and chamber pressure while the unit is disconnected from facility power. At the destination, a docking cone, rapid transfer port or gasketed door connects the chamber to compatible equipment. Glove ports allow final positioning without opening the barrier, and brakes plus leveling pads stabilize the isolator before transfer.

主要な特徴

A sealed chamber protects contents throughout movement between process locations.

Onboard battery power can maintain the selected air-handling mode during transit.

A guided docking interface aligns the mobile chamber with the receiving equipment.

Glove access supports final manipulation after the isolator is docked.

Four-point braking and leveling secure the chassis during connection.

お客様の製品に関する懸念事項

A mobile barrier must keep pressure and filtration stable during movement, then dock without creating a new open transfer step.

Filtration stops when the unit is unplugged.An onboard battery maintains the blower and controls for the planned transfer period.

The mobile chamber is difficult to align with the process port.Guide pins, bumpers and adjustable leveling support repeatable docking.

Opening a door at the destination breaks the barrier.A rapid transfer port or double-door docking interface preserves the closed path.

Caster movement strains the dock seal.Brakes and leveling feet carry the chassis load before the connection is opened.

典型的な用途

Sterile component transferContained sample transportMovement between isolators and filling linesProtected transfer through lower-grade corridors

技術的なパラメータ

Typical configurable construction ranges for a mobile transfer isolator are listed below.

コア材料	Welded SUS316L mobile chamber with safety glass, glove ports and a reinforced stainless caster chassis
パネルの厚さ	40-80 mm double-skin chamber and fan sections
有効幅	600-1400 mm usable transfer width
最大長さ	Up to 2500 mm overall mobile length
鋼鉄の厚さを直面する	1.5-2.5 mm SUS316L chamber; 2.0-3.0 mm chassis members
コア密度	Approximately 8000 kg/m³ for SUS316L structural material
熱伝導率	14-16 W/(m·K) for austenitic stainless steel
表面仕上げ	Fine-brushed or electropolished SUS316L with cleanroom-compatible non-shedding casters
ジョイントタイプ	Pressure-tight welded chamber with gasketed docking interface, sealed glove rings and bolted caster chassis
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Positive- or negative-pressure modeBattery and charging systemRapid transfer or gasketed docking portInternal shelves and retention rails

Planning a Mobile Transfer Isolator specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する