Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de flujo laminar y contención
Aislador de transferencia móvil
A sealed wheeled barrier chamber that protects materials during movement and docks to compatible process equipment or transfer ports at the destination.
- Sealed Mobile Chamber
- Battery-Supported Air Handling
- Process Docking Interface
- Glove-Assisted Transfer
Introducción del producto
The mobile transfer isolator carries sterile or contained items inside a pressure-controlled chamber mounted on a low-vibration caster chassis. An onboard battery can maintain filtration and chamber pressure while the unit is disconnected from facility power. At the destination, a docking cone, rapid transfer port or gasketed door connects the chamber to compatible equipment. Glove ports allow final positioning without opening the barrier, and brakes plus leveling pads stabilize the isolator before transfer.
Características clave
Onboard battery power can maintain the selected air-handling mode during transit.
A guided docking interface aligns the mobile chamber with the receiving equipment.
Glove access supports final manipulation after the isolator is docked.
Four-point braking and leveling secure the chassis during connection.
Preocupaciones del producto del cliente
A mobile barrier must keep pressure and filtration stable during movement, then dock without creating a new open transfer step.
Filtration stops when the unit is unplugged.An onboard battery maintains the blower and controls for the planned transfer period.
The mobile chamber is difficult to align with the process port.Guide pins, bumpers and adjustable leveling support repeatable docking.
Opening a door at the destination breaks the barrier.A rapid transfer port or double-door docking interface preserves the closed path.
Caster movement strains the dock seal.Brakes and leveling feet carry the chassis load before the connection is opened.
Aplicaciones típicas
Sterile component transferContained sample transportMovement between isolators and filling linesProtected transfer through lower-grade corridors
Parámetros técnicos
Typical configurable construction ranges for a mobile transfer isolator are listed below.
| Materiales Core | Welded SUS316L mobile chamber with safety glass, glove ports and a reinforced stainless caster chassis |
|---|---|
| Panel de espesor | 40-80 mm double-skin chamber and fan sections |
| Ancho efectivo | 600-1400 mm usable transfer width |
| Longitud máxima | Up to 2500 mm overall mobile length |
| Acero frente a espesor | 1.5-2.5 mm SUS316L chamber; 2.0-3.0 mm chassis members |
| Densidad Core | Approximately 8000 kg/m³ for SUS316L structural material |
| Conductividad térmica | 14-16 W/(m·K) for austenitic stainless steel |
| Superficie acabada | Fine-brushed or electropolished SUS316L with cleanroom-compatible non-shedding casters |
| Tipo conjunto | Pressure-tight welded chamber with gasketed docking interface, sealed glove rings and bolted caster chassis |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Positive- or negative-pressure modeBattery and charging systemRapid transfer or gasketed docking portInternal shelves and retention rails
¿Planeando una especificación de aislador de transferencia móvil?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
