Mobile transfer isolator with sealed chamber and docking interface

Оборудование для ламинарного потока и ограничения

Мобильный изолятор передачи

A sealed wheeled barrier chamber that protects materials during movement and docks to compatible process equipment or transfer ports at the destination.

Sealed Mobile Chamber
Battery-Supported Air Handling
Process Docking Interface
Glove-Assisted Transfer

Запрос котировки Просмотреть продукты

Введение продукции

The mobile transfer isolator carries sterile or contained items inside a pressure-controlled chamber mounted on a low-vibration caster chassis. An onboard battery can maintain filtration and chamber pressure while the unit is disconnected from facility power. At the destination, a docking cone, rapid transfer port or gasketed door connects the chamber to compatible equipment. Glove ports allow final positioning without opening the barrier, and brakes plus leveling pads stabilize the isolator before transfer.

Основные характеристики

A sealed chamber protects contents throughout movement between process locations.

Onboard battery power can maintain the selected air-handling mode during transit.

A guided docking interface aligns the mobile chamber with the receiving equipment.

Glove access supports final manipulation after the isolator is docked.

Four-point braking and leveling secure the chassis during connection.

Обеспокоенность клиентов продуктами

A mobile barrier must keep pressure and filtration stable during movement, then dock without creating a new open transfer step.

Filtration stops when the unit is unplugged.An onboard battery maintains the blower and controls for the planned transfer period.

The mobile chamber is difficult to align with the process port.Guide pins, bumpers and adjustable leveling support repeatable docking.

Opening a door at the destination breaks the barrier.A rapid transfer port or double-door docking interface preserves the closed path.

Caster movement strains the dock seal.Brakes and leveling feet carry the chassis load before the connection is opened.

Типичные приложения

Sterile component transferContained sample transportMovement between isolators and filling linesProtected transfer through lower-grade corridors

Технические параметры

Typical configurable construction ranges for a mobile transfer isolator are listed below.

Основной материал	Welded SUS316L mobile chamber with safety glass, glove ports and a reinforced stainless caster chassis
Толщина панели	40-80 mm double-skin chamber and fan sections
эффективная ширина	600-1400 mm usable transfer width
Максимальная длина	Up to 2500 mm overall mobile length
Толщина линий стали	1.5-2.5 mm SUS316L chamber; 2.0-3.0 mm chassis members
Плотность ядра	Approximately 8000 kg/m³ for SUS316L structural material
Теплопроводимость	14-16 W/(m·K) for austenitic stainless steel
Поверхностная отделка	Fine-brushed or electropolished SUS316L with cleanroom-compatible non-shedding casters
Объединенный тип	Pressure-tight welded chamber with gasketed docking interface, sealed glove rings and bolted caster chassis
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Positive- or negative-pressure modeBattery and charging systemRapid transfer or gasketed docking portInternal shelves and retention rails

Planning a Mobile Transfer Isolator specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой