Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Fluxo laminar e equipamentos de contenção
Módulo de fluxo laminar de teto
A modular ceiling array that joins multiple HEPA filter and diffuser sections into one continuous unidirectional downflow field above a larger process zone.
- Multi-Module Filter Array
- Continuous Downflow Field
- Sealed Ceiling Grid
- Room-Side Service Options
Introdução do produto
This ceiling system combines multiple fan-filter or terminal HEPA sections within a sealed support grid. Blank panels, lighting modules and service penetrations are integrated without opening uncontrolled gaps in the airflow field. Adjustable grid suspension maintains a flat lower plane across larger process equipment, while the modular arrangement allows filter sections to match the required footprint. It is typically used where one standalone hood cannot cover the full aseptic operation.
Características-chave
Sealed blank panels close areas not occupied by filters, lights or service penetrations.
A common support grid keeps adjacent diffuser faces aligned at one level.
Room-side replaceable modules can reduce access work in the technical ceiling void.
Integrated pressure ports support section-by-section filter condition checks.
Preocupações do produto do cliente
Large process footprints require a continuous clean-air field without misaligned modules, open ceiling joints or unserviceable filters.
Separate hoods leave uncontrolled gaps over a long line.A connected modular grid extends one coordinated airflow field across the selected footprint.
Filter modules sit at different heights after installation.Adjustable suspension points level the complete lower diffuser plane.
Lights and services interrupt filter coverage.Sealed compatible lighting and penetration modules fit within the same grid.
Technical-ceiling access is restricted above equipment.Room-side service filter frames can be selected where overhead access is unavailable.
Aplicações típicas
Aseptic filling line coverageOpen-container process zonesSterile component stagingLarge clean assembly areas
Parâmetros técnicos
Typical configurable construction ranges for a modular laminar flow ceiling are listed below.
| Material principal | Extruded aluminum support grid with powder-coated steel filter housings and aluminum honeycomb diffuser panels |
|---|---|
| Painel de espessura | 70-150 mm filter and diffuser module depth |
| Largura efetiva | 1200-6000 mm assembled ceiling width |
| Comprimento máximo | Up to 12000 mm assembled airflow-field length |
| Aço enfrentando espessura | 0.8-1.2 mm powder-coated steel filter housings and blank panels |
| Densidade Core | 30-50 kg/m³ aluminum honeycomb diffuser core |
| Condutividade térmica | 1.5-2.5 W/(m·K) across the diffuser-panel assembly |
| Superfície acabado | White powder-coated modules with natural or white anodized grid sections |
| Tipo conjunto | Gasketed modular T-grid with sealed filter frames, blank panels and service penetrations |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Fan-filter or terminal-filter modulesIntegrated flush LED panelsRoom-side replaceable filtersCustom blank and service panels
Planning a Laminar Flow Ceiling Module specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
