Complete modular laminar flow ceiling array in three-quarter view

Оборудование для ламинарного потока и ограничения

Модуль для потолка с ламинарным потоком

A modular ceiling array that joins multiple HEPA filter and diffuser sections into one continuous unidirectional downflow field above a larger process zone.

Multi-Module Filter Array
Continuous Downflow Field
Sealed Ceiling Grid
Room-Side Service Options

Запрос котировки Просмотреть продукты

Введение продукции

This ceiling system combines multiple fan-filter or terminal HEPA sections within a sealed support grid. Blank panels, lighting modules and service penetrations are integrated without opening uncontrolled gaps in the airflow field. Adjustable grid suspension maintains a flat lower plane across larger process equipment, while the modular arrangement allows filter sections to match the required footprint. It is typically used where one standalone hood cannot cover the full aseptic operation.

Основные характеристики

Repeating filter modules create a scalable airflow footprint above long or wide equipment.

Sealed blank panels close areas not occupied by filters, lights or service penetrations.

A common support grid keeps adjacent diffuser faces aligned at one level.

Room-side replaceable modules can reduce access work in the technical ceiling void.

Integrated pressure ports support section-by-section filter condition checks.

Обеспокоенность клиентов продуктами

Large process footprints require a continuous clean-air field without misaligned modules, open ceiling joints or unserviceable filters.

Separate hoods leave uncontrolled gaps over a long line.A connected modular grid extends one coordinated airflow field across the selected footprint.

Filter modules sit at different heights after installation.Adjustable suspension points level the complete lower diffuser plane.

Lights and services interrupt filter coverage.Sealed compatible lighting and penetration modules fit within the same grid.

Technical-ceiling access is restricted above equipment.Room-side service filter frames can be selected where overhead access is unavailable.

Типичные приложения

Aseptic filling line coverageOpen-container process zonesSterile component stagingLarge clean assembly areas

Технические параметры

Typical configurable construction ranges for a modular laminar flow ceiling are listed below.

Основной материал	Extruded aluminum support grid with powder-coated steel filter housings and aluminum honeycomb diffuser panels
Толщина панели	70-150 mm filter and diffuser module depth
эффективная ширина	1200-6000 mm assembled ceiling width
Максимальная длина	Up to 12000 mm assembled airflow-field length
Толщина линий стали	0.8-1.2 mm powder-coated steel filter housings and blank panels
Плотность ядра	30-50 kg/m³ aluminum honeycomb diffuser core
Теплопроводимость	1.5-2.5 W/(m·K) across the diffuser-panel assembly
Поверхностная отделка	White powder-coated modules with natural or white anodized grid sections
Объединенный тип	Gasketed modular T-grid with sealed filter frames, blank panels and service penetrations
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Fan-filter or terminal-filter modulesIntegrated flush LED panelsRoom-side replaceable filtersCustom blank and service panels

Planning a Laminar Flow Ceiling Module specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой