English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
Laminar تدفق وحدات السقف
A modular ceiling array that joins multiple HEPA filter and diffuser sections into one continuous unidirectional downflow field above a larger process zone.
- Multi-Module Filter Array
- Continuous Downflow Field
- Sealed Ceiling Grid
- Room-Side Service Options
مقدمة المنتج
This ceiling system combines multiple fan-filter or terminal HEPA sections within a sealed support grid. Blank panels, lighting modules and service penetrations are integrated without opening uncontrolled gaps in the airflow field. Adjustable grid suspension maintains a flat lower plane across larger process equipment, while the modular arrangement allows filter sections to match the required footprint. It is typically used where one standalone hood cannot cover the full aseptic operation.
الخصائص الرئيسية
Sealed blank panels close areas not occupied by filters, lights or service penetrations.
A common support grid keeps adjacent diffuser faces aligned at one level.
Room-side replaceable modules can reduce access work in the technical ceiling void.
Integrated pressure ports support section-by-section filter condition checks.
مخاوف المنتج للعملاء
Large process footprints require a continuous clean-air field without misaligned modules, open ceiling joints or unserviceable filters.
Separate hoods leave uncontrolled gaps over a long line.A connected modular grid extends one coordinated airflow field across the selected footprint.
Filter modules sit at different heights after installation.Adjustable suspension points level the complete lower diffuser plane.
Lights and services interrupt filter coverage.Sealed compatible lighting and penetration modules fit within the same grid.
Technical-ceiling access is restricted above equipment.Room-side service filter frames can be selected where overhead access is unavailable.
تطبيقات نموذجية
Aseptic filling line coverageOpen-container process zonesSterile component stagingLarge clean assembly areas
المعلمات الفنية
Typical configurable construction ranges for a modular laminar flow ceiling are listed below.
| المواد الأساسية | Extruded aluminum support grid with powder-coated steel filter housings and aluminum honeycomb diffuser panels |
|---|---|
| سمك اللوحة | 70-150 mm filter and diffuser module depth |
| العرض الفعال | 1200-6000 mm assembled ceiling width |
| الحد الأقصى الطول | Up to 12000 mm assembled airflow-field length |
| الصلب يواجه سمك | 0.8-1.2 mm powder-coated steel filter housings and blank panels |
| الكثافة الأساسية | 30-50 kg/m³ aluminum honeycomb diffuser core |
| الموصلية الحرارية | 1.5-2.5 W/(m·K) across the diffuser-panel assembly |
| إنهاء السطح | White powder-coated modules with natural or white anodized grid sections |
| نوع المشترك | Gasketed modular T-grid with sealed filter frames, blank panels and service penetrations |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Fan-filter or terminal-filter modulesIntegrated flush LED panelsRoom-side replaceable filtersCustom blank and service panels
Planning a Laminar Flow Ceiling Module specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
