Complete modular laminar flow ceiling array in three-quarter view

Aliran Laminar dan Peralatan Pengekangan

Modul Siling Aliran Laminar

A modular ceiling array that joins multiple HEPA filter and diffuser sections into one continuous unidirectional downflow field above a larger process zone.

Multi-Module Filter Array
Continuous Downflow Field
Sealed Ceiling Grid
Room-Side Service Options

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This ceiling system combines multiple fan-filter or terminal HEPA sections within a sealed support grid. Blank panels, lighting modules and service penetrations are integrated without opening uncontrolled gaps in the airflow field. Adjustable grid suspension maintains a flat lower plane across larger process equipment, while the modular arrangement allows filter sections to match the required footprint. It is typically used where one standalone hood cannot cover the full aseptic operation.

Ciri-ciri Utama

Repeating filter modules create a scalable airflow footprint above long or wide equipment.

Sealed blank panels close areas not occupied by filters, lights or service penetrations.

A common support grid keeps adjacent diffuser faces aligned at one level.

Room-side replaceable modules can reduce access work in the technical ceiling void.

Integrated pressure ports support section-by-section filter condition checks.

Kebimbangan Produk Pelanggan

Large process footprints require a continuous clean-air field without misaligned modules, open ceiling joints or unserviceable filters.

Separate hoods leave uncontrolled gaps over a long line.A connected modular grid extends one coordinated airflow field across the selected footprint.

Filter modules sit at different heights after installation.Adjustable suspension points level the complete lower diffuser plane.

Lights and services interrupt filter coverage.Sealed compatible lighting and penetration modules fit within the same grid.

Technical-ceiling access is restricted above equipment.Room-side service filter frames can be selected where overhead access is unavailable.

Permohonan yang biasa

Aseptic filling line coverageOpen-container process zonesSterile component stagingLarge clean assembly areas

Parameter teknikal

Typical configurable construction ranges for a modular laminar flow ceiling are listed below.

Bahan Teras	Extruded aluminum support grid with powder-coated steel filter housings and aluminum honeycomb diffuser panels
Ketebalan Panel	70-150 mm filter and diffuser module depth
Lebar berkesan	1200-6000 mm assembled ceiling width
Panjang maksimum	Up to 12000 mm assembled airflow-field length
Keluli Menghadapi Ketebalan	0.8-1.2 mm powder-coated steel filter housings and blank panels
Ketumpatan teras	30-50 kg/m³ aluminum honeycomb diffuser core
Kekonduksian Terma	1.5-2.5 W/(m·K) across the diffuser-panel assembly
Kemasan permukaan	White powder-coated modules with natural or white anodized grid sections
Jenis Bersatu	Gasketed modular T-grid with sealed filter frames, blank panels and service penetrations
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Fan-filter or terminal-filter modulesIntegrated flush LED panelsRoom-side replaceable filtersCustom blank and service panels

Planning a Laminar Flow Ceiling Module specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami