Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Fluxo laminar e equipamentos de contenção
Isolador GloveBox
A modular closed chamber that uses glove ports to separate operators from a selected clean, contained or inert process environment.
- Modular Closed Chamber
- Replaceable Glove Ports
- Positive Negative or Inert Operation
- Configurable Transfer Airlock
Introdução do produto
The glovebox isolator is a flexible base platform for processes that need physical separation but do not require a dedicated filling, pharmacy or sterility-test layout. The welded stainless chamber can be configured for filtered positive pressure, filtered negative pressure or inert-gas operation. Glove ports, shelves and service penetrations are arranged around the equipment, while an attached transfer airlock controls material movement. Pressure mode and filtration are selected for the actual product and operator-protection need.
Características-chave
Replaceable glove rings permit different glove materials and port positions.
A transfer airlock isolates material entry from the main work chamber.
Blank service plates accept utilities without field-cutting the pressure shell.
Modular chamber lengths allow a small test setup or longer process train.
Preocupações do produto do cliente
A general glovebox must be configured from the process need rather than assuming one pressure direction or one gas-handling method.
A standard chamber has glove ports in unusable positions.Port locations are set from equipment reach and manipulation studies.
New utilities require drilling through the finished chamber.Replaceable sealed service plates accept planned electrical and process connections.
Material loading exposes the working atmosphere.A separate transfer airlock preserves the main chamber condition.
One pressure mode is assumed for unrelated applications.Positive, negative or inert operation is selected according to product and operator needs.
Aplicações típicas
Closed laboratory processingMoisture-sensitive handlingSmall-scale powder containmentProtected component assembly
Parâmetros técnicos
Typical configurable construction ranges for a modular glovebox isolator are listed below.
| Material principal | Welded SUS304 or SUS316L chamber with laminated safety glass and interchangeable glove assemblies |
|---|---|
| Painel de espessura | 40-80 mm double-skin chamber and utility sections |
| Largura efetiva | 900-3000 mm usable chamber width |
| Comprimento máximo | Up to 5000 mm modular chamber length |
| Aço enfrentando espessura | 1.5-3.0 mm SUS304 or SUS316L pressure shell |
| Densidade Core | Approximately 7900-8000 kg/m³ for austenitic stainless steel |
| Condutividade térmica | 14-16 W/(m·K) for austenitic stainless steel |
| Superfície acabado | Fine-brushed or electropolished stainless interior with clear laminated viewing panels |
| Tipo conjunto | Pressure-tight welded chamber with bolted sealed service plates, glove rings and transfer-airlock flange |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Positive, negative or inert atmosphereSUS304 or SUS316L chamberTransfer airlock or rapid portTwo to eight glove positions
Planning a Glovebox Isolator specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
