Modular stainless glovebox isolator with transfer airlock

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

Glovebox 격리기

A modular closed chamber that uses glove ports to separate operators from a selected clean, contained or inert process environment.

Modular Closed Chamber
Replaceable Glove Ports
Positive Negative or Inert Operation
Configurable Transfer Airlock

견적 요청 제품 찾아보기

상품 소개

The glovebox isolator is a flexible base platform for processes that need physical separation but do not require a dedicated filling, pharmacy or sterility-test layout. The welded stainless chamber can be configured for filtered positive pressure, filtered negative pressure or inert-gas operation. Glove ports, shelves and service penetrations are arranged around the equipment, while an attached transfer airlock controls material movement. Pressure mode and filtration are selected for the actual product and operator-protection need.

주요 기능

The base chamber can support clean, containment or inert-atmosphere operation.

Replaceable glove rings permit different glove materials and port positions.

A transfer airlock isolates material entry from the main work chamber.

Blank service plates accept utilities without field-cutting the pressure shell.

Modular chamber lengths allow a small test setup or longer process train.

고객 제품 관심사

A general glovebox must be configured from the process need rather than assuming one pressure direction or one gas-handling method.

A standard chamber has glove ports in unusable positions.Port locations are set from equipment reach and manipulation studies.

New utilities require drilling through the finished chamber.Replaceable sealed service plates accept planned electrical and process connections.

Material loading exposes the working atmosphere.A separate transfer airlock preserves the main chamber condition.

One pressure mode is assumed for unrelated applications.Positive, negative or inert operation is selected according to product and operator needs.

일반적인 응용 프로그램

Closed laboratory processingMoisture-sensitive handlingSmall-scale powder containmentProtected component assembly

기술 매개변수

Typical configurable construction ranges for a modular glovebox isolator are listed below.

핵심 재료	Welded SUS304 or SUS316L chamber with laminated safety glass and interchangeable glove assemblies
패널 두께	40-80 mm double-skin chamber and utility sections
유효 폭	900-3000 mm usable chamber width
최대 길이	Up to 5000 mm modular chamber length
강철 면면 두께	1.5-3.0 mm SUS304 or SUS316L pressure shell
코어 밀도	Approximately 7900-8000 kg/m³ for austenitic stainless steel
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Fine-brushed or electropolished stainless interior with clear laminated viewing panels
접합 유형	Pressure-tight welded chamber with bolted sealed service plates, glove rings and transfer-airlock flange
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Positive, negative or inert atmosphereSUS304 or SUS316L chamberTransfer airlock or rapid portTwo to eight glove positions

Planning a Glovebox Isolator specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.