English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Оборудование для ламинарного потока и ограничения
Glovebox изолятор
A modular closed chamber that uses glove ports to separate operators from a selected clean, contained or inert process environment.
- Modular Closed Chamber
- Replaceable Glove Ports
- Positive Negative or Inert Operation
- Configurable Transfer Airlock
Введение продукции
The glovebox isolator is a flexible base platform for processes that need physical separation but do not require a dedicated filling, pharmacy or sterility-test layout. The welded stainless chamber can be configured for filtered positive pressure, filtered negative pressure or inert-gas operation. Glove ports, shelves and service penetrations are arranged around the equipment, while an attached transfer airlock controls material movement. Pressure mode and filtration are selected for the actual product and operator-protection need.
Основные характеристики
Replaceable glove rings permit different glove materials and port positions.
A transfer airlock isolates material entry from the main work chamber.
Blank service plates accept utilities without field-cutting the pressure shell.
Modular chamber lengths allow a small test setup or longer process train.
Обеспокоенность клиентов продуктами
A general glovebox must be configured from the process need rather than assuming one pressure direction or one gas-handling method.
A standard chamber has glove ports in unusable positions.Port locations are set from equipment reach and manipulation studies.
New utilities require drilling through the finished chamber.Replaceable sealed service plates accept planned electrical and process connections.
Material loading exposes the working atmosphere.A separate transfer airlock preserves the main chamber condition.
One pressure mode is assumed for unrelated applications.Positive, negative or inert operation is selected according to product and operator needs.
Типичные приложения
Closed laboratory processingMoisture-sensitive handlingSmall-scale powder containmentProtected component assembly
Технические параметры
Typical configurable construction ranges for a modular glovebox isolator are listed below.
| Основной материал | Welded SUS304 or SUS316L chamber with laminated safety glass and interchangeable glove assemblies |
|---|---|
| Толщина панели | 40-80 mm double-skin chamber and utility sections |
| эффективная ширина | 900-3000 mm usable chamber width |
| Максимальная длина | Up to 5000 mm modular chamber length |
| Толщина линий стали | 1.5-3.0 mm SUS304 or SUS316L pressure shell |
| Плотность ядра | Approximately 7900-8000 kg/m³ for austenitic stainless steel |
| Теплопроводимость | 14-16 W/(m·K) for austenitic stainless steel |
| Поверхностная отделка | Fine-brushed or electropolished stainless interior with clear laminated viewing panels |
| Объединенный тип | Pressure-tight welded chamber with bolted sealed service plates, glove rings and transfer-airlock flange |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Positive, negative or inert atmosphereSUS304 or SUS316L chamberTransfer airlock or rapid portTwo to eight glove positions
Planning a Glovebox Isolator specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
