Modular stainless glovebox isolator with transfer airlock

Aliran Laminar dan Peralatan Penahanan

Isolator Glovebox

A modular closed chamber that uses glove ports to separate operators from a selected clean, contained or inert process environment.

Modular Closed Chamber
Replaceable Glove Ports
Positive Negative or Inert Operation
Configurable Transfer Airlock

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The glovebox isolator is a flexible base platform for processes that need physical separation but do not require a dedicated filling, pharmacy or sterility-test layout. The welded stainless chamber can be configured for filtered positive pressure, filtered negative pressure or inert-gas operation. Glove ports, shelves and service penetrations are arranged around the equipment, while an attached transfer airlock controls material movement. Pressure mode and filtration are selected for the actual product and operator-protection need.

Fitur utama:

The base chamber can support clean, containment or inert-atmosphere operation.

Replaceable glove rings permit different glove materials and port positions.

A transfer airlock isolates material entry from the main work chamber.

Blank service plates accept utilities without field-cutting the pressure shell.

Modular chamber lengths allow a small test setup or longer process train.

Kekhawatiran produk pelanggan

A general glovebox must be configured from the process need rather than assuming one pressure direction or one gas-handling method.

A standard chamber has glove ports in unusable positions.Port locations are set from equipment reach and manipulation studies.

New utilities require drilling through the finished chamber.Replaceable sealed service plates accept planned electrical and process connections.

Material loading exposes the working atmosphere.A separate transfer airlock preserves the main chamber condition.

One pressure mode is assumed for unrelated applications.Positive, negative or inert operation is selected according to product and operator needs.

Aplikasi yang Tipis

Closed laboratory processingMoisture-sensitive handlingSmall-scale powder containmentProtected component assembly

Parameter teknis

Typical configurable construction ranges for a modular glovebox isolator are listed below.

Bahan inti	Welded SUS304 or SUS316L chamber with laminated safety glass and interchangeable glove assemblies
Ketebalan Panel (Panel Thickness)	40-80 mm double-skin chamber and utility sections
Efektif lebar	900-3000 mm usable chamber width
Panjang maksimum	Up to 5000 mm modular chamber length
Baja menghadap ketebalan	1.5-3.0 mm SUS304 or SUS316L pressure shell
Kepadatan inti (core density)	Approximately 7900-8000 kg/m³ for austenitic stainless steel
Konduktivitas Termal (Thermal Conductivity)	14 - 16 W / (m · K) untuk baja tahan karat austenitic
Permukaan selesai	Fine-brushed or electropolished stainless interior with clear laminated viewing panels
Jenis Bersama	Pressure-tight welded chamber with bolted sealed service plates, glove rings and transfer-airlock flange
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Positive, negative or inert atmosphereSUS304 or SUS316L chamberTransfer airlock or rapid portTwo to eight glove positions

Planning a Glovebox Isolator specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami