Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de descontaminação de pessoal e materiais
Z Portal Blow-Off do Portal
A fixed doorless blow-off portal that directs filtered air across personnel at a compact doorway without creating a full enclosed air-shower chamber.
- Doorless Fixed Portal
- Side-Mounted Blow-Off Nozzles
- Compact Doorway Treatment
- Open High-Speed Passage
Introdução do produto
The fixed doorway blow-off portal is a permanent doorless open frame around a personnel opening, not a closed booth or a tall enclosed filtration tower. Compact side casings contain the air equipment and nozzle manifolds, while an overhead bridge ties the two posts together. Presence sensing can activate the blow-off airflow as personnel cross the open portal, providing a practical dust-removal point where a full airlock is not required.
Características-chave
Side-mounted blow-off nozzles direct air across the passing person.
An overhead bridge aligns the two portal posts and protects routed wiring.
Lower inlet sections collect part of the disturbed dust close to footwear level.
Presence sensing can reduce operation when the passage is unoccupied.
Preocupações do produto do cliente
A fixed open portal must fit a shallow doorway while delivering useful airflow and retaining a stable structural connection to the surrounding partition.
The site does not have depth for a two-door chamber.Blow-off components are packaged in slim side casings around the existing opening.
Fast-moving personnel receive very brief airflow exposure.A closely spaced nozzle array can cover the crossing zone while presence sensing activates the system.
Two independent posts can lose alignment over time.A rigid overhead bridge and fixed anchors tie both posts into one portal frame.
A full enclosed unit would obstruct a busy passage.The doorless format preserves an open high-speed walking route.
Aplicações típicas
Doorless electronics gowning routesCompact laboratory entrancesTemporary clean-booth accessHigh-throughput personnel crossings
Parâmetros técnicos
Typical structural ranges for a fixed doorless blow-off portal are shown below.
| Material principal | Fixed powder-coated steel portal with side-mounted filtered-air blow-off manifolds, lower inlet sections and a reinforced overhead bridge |
|---|---|
| Painel de espessura | 1.0-1.2 mm side-casing and bridge panels |
| Largura efetiva | 900-1400 mm clear doorless opening |
| Comprimento máximo | Up to 1800 mm overall portal span |
| Aço enfrentando espessura | 1.0-1.2 mm formed steel sheet at the posts and bridge |
| Densidade Core | 30-45 kg/m³ acoustic PET-fibre infill in the side equipment casings |
| Condutividade térmica | 0.034-0.040 W/(m·K) for the acoustic casing infill |
| Superfície acabado | White powder-coated portal with brushed stainless nozzle and inlet faces |
| Tipo conjunto | Bolted post-to-bridge connections with fixed base anchors and removable service covers |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Standard or widened clear openingPresence sensor and status lightFixed base plates or wall bracingIntegrated ionising bar
Planning a Fixed Doorway Blow-Off Portal specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
