İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Personel ve Malzeme Dekontaminasyon Ekipmanları
Sabit Kapı Blow-Off Portal
A fixed doorless blow-off portal that directs filtered air across personnel at a compact doorway without creating a full enclosed air-shower chamber.
- Doorless Fixed Portal
- Side-Mounted Blow-Off Nozzles
- Compact Doorway Treatment
- Open High-Speed Passage
Ürün tanıtımı
The fixed doorway blow-off portal is a permanent doorless open frame around a personnel opening, not a closed booth or a tall enclosed filtration tower. Compact side casings contain the air equipment and nozzle manifolds, while an overhead bridge ties the two posts together. Presence sensing can activate the blow-off airflow as personnel cross the open portal, providing a practical dust-removal point where a full airlock is not required.
Ana Özellikler
Side-mounted blow-off nozzles direct air across the passing person.
An overhead bridge aligns the two portal posts and protects routed wiring.
Lower inlet sections collect part of the disturbed dust close to footwear level.
Presence sensing can reduce operation when the passage is unoccupied.
Müşteri Ürün Sorunları
A fixed open portal must fit a shallow doorway while delivering useful airflow and retaining a stable structural connection to the surrounding partition.
The site does not have depth for a two-door chamber.Blow-off components are packaged in slim side casings around the existing opening.
Fast-moving personnel receive very brief airflow exposure.A closely spaced nozzle array can cover the crossing zone while presence sensing activates the system.
Two independent posts can lose alignment over time.A rigid overhead bridge and fixed anchors tie both posts into one portal frame.
A full enclosed unit would obstruct a busy passage.The doorless format preserves an open high-speed walking route.
Tipik uygulamalar
Doorless electronics gowning routesCompact laboratory entrancesTemporary clean-booth accessHigh-throughput personnel crossings
Teknik parametreler
Typical structural ranges for a fixed doorless blow-off portal are shown below.
| Temel malzemeler | Fixed powder-coated steel portal with side-mounted filtered-air blow-off manifolds, lower inlet sections and a reinforced overhead bridge |
|---|---|
| Panel kalınlığı | 1.0-1.2 mm side-casing and bridge panels |
| Effective Width (Etkili Genişlik) | 900-1400 mm clear doorless opening |
| Maksimum uzunluk | Up to 1800 mm overall portal span |
| Çelik yüz yüze kalınlığı | 1.0-1.2 mm formed steel sheet at the posts and bridge |
| Core Density (Çekirdek Yoğunluğu) | 30-45 kg/m³ acoustic PET-fibre infill in the side equipment casings |
| Termal İletkenlik | 0.034-0.040 W/(m·K) for the acoustic casing infill |
| Yüzey bitirme | White powder-coated portal with brushed stainless nozzle and inlet faces |
| Ortak tip | Bolted post-to-bridge connections with fixed base anchors and removable service covers |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Standard or widened clear openingPresence sensor and status lightFixed base plates or wall bracingIntegrated ionising bar
Planning a Fixed Doorway Blow-Off Portal specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
