Complete fixed doorless blow-off portal with twin side nozzle posts

Peralatan Dekontaminasi Kakitangan dan Bahan

Portal Pintu Tetap Blow-Off

A fixed doorless blow-off portal that directs filtered air across personnel at a compact doorway without creating a full enclosed air-shower chamber.

Doorless Fixed Portal
Side-Mounted Blow-Off Nozzles
Compact Doorway Treatment
Open High-Speed Passage

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The fixed doorway blow-off portal is a permanent doorless open frame around a personnel opening, not a closed booth or a tall enclosed filtration tower. Compact side casings contain the air equipment and nozzle manifolds, while an overhead bridge ties the two posts together. Presence sensing can activate the blow-off airflow as personnel cross the open portal, providing a practical dust-removal point where a full airlock is not required.

Ciri-ciri Utama

A permanently anchored open frame keeps the doorway clear of doors and a deep chamber.

Side-mounted blow-off nozzles direct air across the passing person.

An overhead bridge aligns the two portal posts and protects routed wiring.

Lower inlet sections collect part of the disturbed dust close to footwear level.

Presence sensing can reduce operation when the passage is unoccupied.

Kebimbangan Produk Pelanggan

A fixed open portal must fit a shallow doorway while delivering useful airflow and retaining a stable structural connection to the surrounding partition.

The site does not have depth for a two-door chamber.Blow-off components are packaged in slim side casings around the existing opening.

Fast-moving personnel receive very brief airflow exposure.A closely spaced nozzle array can cover the crossing zone while presence sensing activates the system.

Two independent posts can lose alignment over time.A rigid overhead bridge and fixed anchors tie both posts into one portal frame.

A full enclosed unit would obstruct a busy passage.The doorless format preserves an open high-speed walking route.

Permohonan yang biasa

Doorless electronics gowning routesCompact laboratory entrancesTemporary clean-booth accessHigh-throughput personnel crossings

Parameter teknikal

Typical structural ranges for a fixed doorless blow-off portal are shown below.

Bahan Teras	Fixed powder-coated steel portal with side-mounted filtered-air blow-off manifolds, lower inlet sections and a reinforced overhead bridge
Ketebalan Panel	1.0-1.2 mm side-casing and bridge panels
Lebar berkesan	900-1400 mm clear doorless opening
Panjang maksimum	Up to 1800 mm overall portal span
Keluli Menghadapi Ketebalan	1.0-1.2 mm formed steel sheet at the posts and bridge
Ketumpatan teras	30-45 kg/m³ acoustic PET-fibre infill in the side equipment casings
Kekonduksian Terma	0.034-0.040 W/(m·K) for the acoustic casing infill
Kemasan permukaan	White powder-coated portal with brushed stainless nozzle and inlet faces
Jenis Bersatu	Bolted post-to-bridge connections with fixed base anchors and removable service covers
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Standard or widened clear openingPresence sensor and status lightFixed base plates or wall bracingIntegrated ionising bar

Planning a Fixed Doorway Blow-Off Portal specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami