Complete fixed doorless blow-off portal with twin side nozzle posts

인력 및 재료 오염 제거 장비

고정 도어 블로우 오프 포털

A fixed doorless blow-off portal that directs filtered air across personnel at a compact doorway without creating a full enclosed air-shower chamber.

Doorless Fixed Portal
Side-Mounted Blow-Off Nozzles
Compact Doorway Treatment
Open High-Speed Passage

견적 요청 제품 찾아보기

상품 소개

The fixed doorway blow-off portal is a permanent doorless open frame around a personnel opening, not a closed booth or a tall enclosed filtration tower. Compact side casings contain the air equipment and nozzle manifolds, while an overhead bridge ties the two posts together. Presence sensing can activate the blow-off airflow as personnel cross the open portal, providing a practical dust-removal point where a full airlock is not required.

주요 기능

A permanently anchored open frame keeps the doorway clear of doors and a deep chamber.

Side-mounted blow-off nozzles direct air across the passing person.

An overhead bridge aligns the two portal posts and protects routed wiring.

Lower inlet sections collect part of the disturbed dust close to footwear level.

Presence sensing can reduce operation when the passage is unoccupied.

고객 제품 관심사

A fixed open portal must fit a shallow doorway while delivering useful airflow and retaining a stable structural connection to the surrounding partition.

The site does not have depth for a two-door chamber.Blow-off components are packaged in slim side casings around the existing opening.

Fast-moving personnel receive very brief airflow exposure.A closely spaced nozzle array can cover the crossing zone while presence sensing activates the system.

Two independent posts can lose alignment over time.A rigid overhead bridge and fixed anchors tie both posts into one portal frame.

A full enclosed unit would obstruct a busy passage.The doorless format preserves an open high-speed walking route.

일반적인 응용 프로그램

Doorless electronics gowning routesCompact laboratory entrancesTemporary clean-booth accessHigh-throughput personnel crossings

기술 매개변수

Typical structural ranges for a fixed doorless blow-off portal are shown below.

핵심 재료	Fixed powder-coated steel portal with side-mounted filtered-air blow-off manifolds, lower inlet sections and a reinforced overhead bridge
패널 두께	1.0-1.2 mm side-casing and bridge panels
유효 폭	900-1400 mm clear doorless opening
최대 길이	Up to 1800 mm overall portal span
강철 면면 두께	1.0-1.2 mm formed steel sheet at the posts and bridge
코어 밀도	30-45 kg/m³ acoustic PET-fibre infill in the side equipment casings
열전도도 (Thermal Conductivity)	0.034-0.040 W/(m·K) for the acoustic casing infill
표면 마무리	White powder-coated portal with brushed stainless nozzle and inlet faces
접합 유형	Bolted post-to-bridge connections with fixed base anchors and removable service covers
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Standard or widened clear openingPresence sensor and status lightFixed base plates or wall bracingIntegrated ionising bar

Planning a Fixed Doorway Blow-Off Portal specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.