Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de parede e teto para sala limpa
Painel de sala limpa Rock Wool
A steel-faced rock wool cleanroom panel configured for fire-rated wall and ceiling assemblies, combining non-combustible mineral insulation, protected joints, controlled service openings and smooth hygienic room surfaces for clean manufacturing interiors.
- High-Density Stone Wool Core
- Fire-Rated Assembly Construction
- Protected Interlocking Joints
- Hygienic Steel Surfaces
Introdução do produto
Fire-Rated Rock Wool Cleanroom Panels use vertically oriented stone-wool lamellas between steel facings and incorporate joint, frame and fixing details that preserve integrity during fire exposure. The panel is treated as part of a complete wall or ceiling assembly rather than as an isolated core material. Higher density and increasing panel thickness support longer fire-resistance configurations, while metal edge closures protect the core and maintain a clean internal finish. The system is suitable for controlled areas that require both hygienic surfaces and compartmentation using tested mineral-core construction.
Características-chave
Vertical lamella orientation improves through-thickness mechanical support between the steel skins.
Joint geometry limits direct flame and hot-gas paths between adjacent modules.
Protected service openings preserve the continuity of the fire-separating layer.
Smooth room-side steel remains compatible with normal cleanroom wiping and disinfection.
Preocupações do produto do cliente
Customers need the panel thickness, joint, support spacing and penetration details to work together as one fire-separating construction.
A non-combustible core alone does not stop hot gases passing through an open joint.Profiled interlocks, mineral packing and compatible fire-stop seals protect the full panel connection.
Unprotected service penetrations can bypass the fire-resisting wall.Tested collars, sleeves and perimeter seals close openings around cables, ducts and pipes.
Insufficient density or thickness reduces the available fire-resistance configuration.The selected stone-wool density and panel depth are matched to the required assembly duration.
Fire-focused materials can introduce rough surfaces into a hygienic room.Continuous steel skins and closed edges keep the mineral insulation outside the cleanable surface.
Aplicações típicas
Pharmaceutical fire-compartment partitionsClean corridors adjoining plant roomsBattery and electronics controlled areasLaboratory walls beside utility zonesMineral-core cleanroom ceilings
Parâmetros técnicos
Common construction ranges for steel-faced fire-rated rock wool panels are shown below.
| Material principal | Vertically oriented hydrophobic stone wool lamellas |
|---|---|
| Painel de espessura | 60, 80, 100, 120 or 150 mm |
| Largura efetiva | 950, 1000 or 1150 mm |
| Comprimento máximo | 6000 mm |
| Aço enfrentando espessura | 0.50–0.80 mm |
| Densidade Core | 100–150 kg/m³ |
| Condutividade térmica | 0.039–0.045 W/(m·K) |
| Superfície acabado | Pre-painted galvanized steel or stainless steel cleanroom finish |
| Tipo conjunto | Fire-protected tongue-and-groove joint with mineral packing and sealant |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
EN 13501-2 EI assembly configurationsAlternative rock wool densityStainless steel room-side faceFire-stopped service penetration modules
Planning a Fire-Rated Rock Wool Cleanroom Panel specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
