Complete fire-rated rock wool cleanroom panel with steel facings

클린룸 벽 및 천장 시스템

방화 등급 Rock Wool Cleanroom Panel

A steel-faced rock wool cleanroom panel configured for fire-rated wall and ceiling assemblies, combining non-combustible mineral insulation, protected joints, controlled service openings and smooth hygienic room surfaces for clean manufacturing interiors.

High-Density Stone Wool Core
Fire-Rated Assembly Construction
Protected Interlocking Joints
Hygienic Steel Surfaces

견적 요청 제품 찾아보기

상품 소개

Fire-Rated Rock Wool Cleanroom Panels use vertically oriented stone-wool lamellas between steel facings and incorporate joint, frame and fixing details that preserve integrity during fire exposure. The panel is treated as part of a complete wall or ceiling assembly rather than as an isolated core material. Higher density and increasing panel thickness support longer fire-resistance configurations, while metal edge closures protect the core and maintain a clean internal finish. The system is suitable for controlled areas that require both hygienic surfaces and compartmentation using tested mineral-core construction.

주요 기능

Stone wool insulation is inorganic and does not add a combustible foam core to the enclosure.

Vertical lamella orientation improves through-thickness mechanical support between the steel skins.

Joint geometry limits direct flame and hot-gas paths between adjacent modules.

Protected service openings preserve the continuity of the fire-separating layer.

Smooth room-side steel remains compatible with normal cleanroom wiping and disinfection.

고객 제품 관심사

Customers need the panel thickness, joint, support spacing and penetration details to work together as one fire-separating construction.

A non-combustible core alone does not stop hot gases passing through an open joint.Profiled interlocks, mineral packing and compatible fire-stop seals protect the full panel connection.

Unprotected service penetrations can bypass the fire-resisting wall.Tested collars, sleeves and perimeter seals close openings around cables, ducts and pipes.

Insufficient density or thickness reduces the available fire-resistance configuration.The selected stone-wool density and panel depth are matched to the required assembly duration.

Fire-focused materials can introduce rough surfaces into a hygienic room.Continuous steel skins and closed edges keep the mineral insulation outside the cleanable surface.

일반적인 응용 프로그램

Pharmaceutical fire-compartment partitionsClean corridors adjoining plant roomsBattery and electronics controlled areasLaboratory walls beside utility zonesMineral-core cleanroom ceilings

기술 매개변수

Common construction ranges for steel-faced fire-rated rock wool panels are shown below.

핵심 재료	Vertically oriented hydrophobic stone wool lamellas
패널 두께	60, 80, 100, 120 or 150 mm
유효 폭	950, 1000 or 1150 mm
최대 길이	6000 mm
강철 면면 두께	0. 50 - 0. 80 mm
코어 밀도	100–150 kg/m³
열전도도 (Thermal Conductivity)	0.039–0.045 W/(m·K)
표면 마무리	Pre-painted galvanized steel or stainless steel cleanroom finish
접합 유형	Fire-protected tongue-and-groove joint with mineral packing and sealant
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

EN 13501-2 EI assembly configurationsAlternative rock wool densityStainless steel room-side faceFire-stopped service penetration modules

Planning a Fire-Rated Rock Wool Cleanroom Panel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.