Complete fire-rated rock wool cleanroom panel with steel facings

Dinding bilik bersih dan sistem siling

Panel Ruang Bersih Bulu Batu Bernilai Api

A steel-faced rock wool cleanroom panel configured for fire-rated wall and ceiling assemblies, combining non-combustible mineral insulation, protected joints, controlled service openings and smooth hygienic room surfaces for clean manufacturing interiors.

High-Density Stone Wool Core
Fire-Rated Assembly Construction
Protected Interlocking Joints
Hygienic Steel Surfaces

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Fire-Rated Rock Wool Cleanroom Panels use vertically oriented stone-wool lamellas between steel facings and incorporate joint, frame and fixing details that preserve integrity during fire exposure. The panel is treated as part of a complete wall or ceiling assembly rather than as an isolated core material. Higher density and increasing panel thickness support longer fire-resistance configurations, while metal edge closures protect the core and maintain a clean internal finish. The system is suitable for controlled areas that require both hygienic surfaces and compartmentation using tested mineral-core construction.

Ciri-ciri Utama

Stone wool insulation is inorganic and does not add a combustible foam core to the enclosure.

Vertical lamella orientation improves through-thickness mechanical support between the steel skins.

Joint geometry limits direct flame and hot-gas paths between adjacent modules.

Protected service openings preserve the continuity of the fire-separating layer.

Smooth room-side steel remains compatible with normal cleanroom wiping and disinfection.

Kebimbangan Produk Pelanggan

Customers need the panel thickness, joint, support spacing and penetration details to work together as one fire-separating construction.

A non-combustible core alone does not stop hot gases passing through an open joint.Profiled interlocks, mineral packing and compatible fire-stop seals protect the full panel connection.

Unprotected service penetrations can bypass the fire-resisting wall.Tested collars, sleeves and perimeter seals close openings around cables, ducts and pipes.

Insufficient density or thickness reduces the available fire-resistance configuration.The selected stone-wool density and panel depth are matched to the required assembly duration.

Fire-focused materials can introduce rough surfaces into a hygienic room.Continuous steel skins and closed edges keep the mineral insulation outside the cleanable surface.

Permohonan yang biasa

Pharmaceutical fire-compartment partitionsClean corridors adjoining plant roomsBattery and electronics controlled areasLaboratory walls beside utility zonesMineral-core cleanroom ceilings

Parameter teknikal

Common construction ranges for steel-faced fire-rated rock wool panels are shown below.

Bahan Teras	Vertically oriented hydrophobic stone wool lamellas
Ketebalan Panel	60, 80, 100, 120 or 150 mm
Lebar berkesan	950, 1000 or 1150 mm
Panjang maksimum	6000 mm
Keluli Menghadapi Ketebalan	0.50–0.80 mm
Ketumpatan teras	100–150 kg/m³
Kekonduksian Terma	0.039–0.045 W/(m·K)
Kemasan permukaan	Pre-painted galvanized steel or stainless steel cleanroom finish
Jenis Bersatu	Fire-protected tongue-and-groove joint with mineral packing and sealant
Penyesuaian	Terdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

EN 13501-2 EI assembly configurationsAlternative rock wool densityStainless steel room-side faceFire-stopped service penetration modules

Planning a Fire-Rated Rock Wool Cleanroom Panel specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami