Complete fire-rated rock wool cleanroom panel with steel facings

クリーンルームの壁と天井システム

Fire 定格岩のウールクリーンルームパネル

A steel-faced rock wool cleanroom panel configured for fire-rated wall and ceiling assemblies, combining non-combustible mineral insulation, protected joints, controlled service openings and smooth hygienic room surfaces for clean manufacturing interiors.

High-Density Stone Wool Core
Fire-Rated Assembly Construction
Protected Interlocking Joints
Hygienic Steel Surfaces

見積もりリクエスト製品案内

商品紹介

Fire-Rated Rock Wool Cleanroom Panels use vertically oriented stone-wool lamellas between steel facings and incorporate joint, frame and fixing details that preserve integrity during fire exposure. The panel is treated as part of a complete wall or ceiling assembly rather than as an isolated core material. Higher density and increasing panel thickness support longer fire-resistance configurations, while metal edge closures protect the core and maintain a clean internal finish. The system is suitable for controlled areas that require both hygienic surfaces and compartmentation using tested mineral-core construction.

主要な特徴

Stone wool insulation is inorganic and does not add a combustible foam core to the enclosure.

Vertical lamella orientation improves through-thickness mechanical support between the steel skins.

Joint geometry limits direct flame and hot-gas paths between adjacent modules.

Protected service openings preserve the continuity of the fire-separating layer.

Smooth room-side steel remains compatible with normal cleanroom wiping and disinfection.

お客様の製品に関する懸念事項

Customers need the panel thickness, joint, support spacing and penetration details to work together as one fire-separating construction.

A non-combustible core alone does not stop hot gases passing through an open joint.Profiled interlocks, mineral packing and compatible fire-stop seals protect the full panel connection.

Unprotected service penetrations can bypass the fire-resisting wall.Tested collars, sleeves and perimeter seals close openings around cables, ducts and pipes.

Insufficient density or thickness reduces the available fire-resistance configuration.The selected stone-wool density and panel depth are matched to the required assembly duration.

Fire-focused materials can introduce rough surfaces into a hygienic room.Continuous steel skins and closed edges keep the mineral insulation outside the cleanable surface.

典型的な用途

Pharmaceutical fire-compartment partitionsClean corridors adjoining plant roomsBattery and electronics controlled areasLaboratory walls beside utility zonesMineral-core cleanroom ceilings

技術的なパラメータ

Common construction ranges for steel-faced fire-rated rock wool panels are shown below.

コア材料	Vertically oriented hydrophobic stone wool lamellas
パネルの厚さ	60, 80, 100, 120 or 150 mm
有効幅	950, 1000 or 1150 mm
最大長さ	6000 mm
鋼鉄の厚さを直面する	0.50 — 0.80 mm
コア密度	100–150 kg/m³
熱伝導率	0.039–0.045 W/(m·K)
表面仕上げ	Pre-painted galvanized steel or stainless steel cleanroom finish
ジョイントタイプ	Fire-protected tongue-and-groove joint with mineral packing and sealant
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

EN 13501-2 EI assembly configurationsAlternative rock wool densityStainless steel room-side faceFire-stopped service penetration modules

Planning a Fire-Rated Rock Wool Cleanroom Panel specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する