Yellow ESD grounding socket with dual banana jacks snap and earth lead

ESD e produtos antiestáticos

ESD Grounding Socket (em inglês)

The ESD Grounding Socket is a fixed bonding point that consolidates wrist-strap, mat and equipment-ground connections at a workstation.

Dual banana jacks provide convenient operator connection points.
Central snap supports mat or accessory bonding.
High-visibility faceplate distinguishes the ESD ground interface.

Solicite um orçamento. Browse produtos

Introdução do produto

A durable yellow insulating faceplate carries two standard banana receptacles and a stainless snap interface. Rear terminals join the contacts to a green-and-yellow protective-earth conductor ending in a ring lug. Recessed mounting holes support bench, wall or furniture-panel installation while keeping the connection point visible and accessible.

Características-chave

Two banana receptacles serve operator and guest leads.

Stainless snap accepts common mat-grounding hardware.

Rear screw or stud terminal provides a defined earth connection.

Bright yellow housing aids recognition during audits.

Recessed fasteners produce a tidy fixed installation.

Modular faceplate format suits benches and partition panels.

Preocupações do produto do cliente

A fixed bonding point must be readily identifiable, mechanically secure and electrically joined to the designated facility grounding network.

Operators connect to an unverified metal fixture.A dedicated yellow faceplate clearly identifies the approved bonding point.

One socket cannot serve a second operator.Dual banana receptacles provide two accessible cord connections.

Mat and wrist-strap connections compete for the same interface.Separate banana jacks and snap hardware accommodate different terminations.

A loose rear wire creates intermittent grounding.Mechanical terminal hardware and a crimped ring lug establish a serviceable connection.

Surface-mounted hardware is snagged or damaged.Recessed mounting holes and a compact plate protect the working interfaces.

Aplicações típicas

Electronics assembly workbenches.Laboratory and service stations.ESD-protected room partitions.Grounded packing and inspection tables.Training and visitor work positions.

Parâmetros técnicos

The representative dimensions below cover common fixed earth-bonding points; plate format, socket count, snap type and lead length can be configured.

Material principal	Flame-retardant ABS faceplate with brass and stainless contacts
Painel de espessura	3.0–5.0 mm faceplate thickness
Largura efetiva	85–120 mm faceplate width
Comprimento máximo	Up to 3000 mm protective-earth lead length
Aço enfrentando espessura	0.8 mm nominal stainless snap and terminal hardware thickness
Densidade Core	1030–1080 kg/m³ ABS resin density
Condutividade térmica	0.17–0.22 W/(m·K)
Superfície acabado	High-visibility yellow matte molded faceplate with black and silver contacts
Tipo conjunto	Dual banana receptacles and 10 mm snap bonded to rear earth terminal and ring-lug lead
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

One, two or four banana jacks.4 mm or 10 mm snap formats.Surface, flush or bench-edge mounting.Yellow, black or white faceplates.Straight lead or rear screw-terminal connection.Alternative cable length and ring-lug bore.

Planning a ESD Grounding Socket specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe