Yellow ESD grounding socket with dual banana jacks snap and earth lead

ESD 및 정전기 방지 제품

ESD 접지 소켓

The ESD Grounding Socket is a fixed bonding point that consolidates wrist-strap, mat and equipment-ground connections at a workstation.

Dual banana jacks provide convenient operator connection points.
Central snap supports mat or accessory bonding.
High-visibility faceplate distinguishes the ESD ground interface.

견적 요청 제품 찾아보기

상품 소개

A durable yellow insulating faceplate carries two standard banana receptacles and a stainless snap interface. Rear terminals join the contacts to a green-and-yellow protective-earth conductor ending in a ring lug. Recessed mounting holes support bench, wall or furniture-panel installation while keeping the connection point visible and accessible.

주요 기능

Two banana receptacles serve operator and guest leads.

Stainless snap accepts common mat-grounding hardware.

Rear screw or stud terminal provides a defined earth connection.

Bright yellow housing aids recognition during audits.

Recessed fasteners produce a tidy fixed installation.

Modular faceplate format suits benches and partition panels.

고객 제품 관심사

A fixed bonding point must be readily identifiable, mechanically secure and electrically joined to the designated facility grounding network.

Operators connect to an unverified metal fixture.A dedicated yellow faceplate clearly identifies the approved bonding point.

One socket cannot serve a second operator.Dual banana receptacles provide two accessible cord connections.

Mat and wrist-strap connections compete for the same interface.Separate banana jacks and snap hardware accommodate different terminations.

A loose rear wire creates intermittent grounding.Mechanical terminal hardware and a crimped ring lug establish a serviceable connection.

Surface-mounted hardware is snagged or damaged.Recessed mounting holes and a compact plate protect the working interfaces.

일반적인 응용 프로그램

Electronics assembly workbenches.Laboratory and service stations.ESD-protected room partitions.Grounded packing and inspection tables.Training and visitor work positions.

기술 매개변수

The representative dimensions below cover common fixed earth-bonding points; plate format, socket count, snap type and lead length can be configured.

핵심 재료	Flame-retardant ABS faceplate with brass and stainless contacts
패널 두께	3.0–5.0 mm faceplate thickness
유효 폭	85–120 mm faceplate width
최대 길이	Up to 3000 mm protective-earth lead length
강철 면면 두께	0.8 mm nominal stainless snap and terminal hardware thickness
코어 밀도	1030–1080 kg/m³ ABS resin density
열전도도 (Thermal Conductivity)	0.17–0.22 W/(m·K)
표면 마무리	High-visibility yellow matte molded faceplate with black and silver contacts
접합 유형	Dual banana receptacles and 10 mm snap bonded to rear earth terminal and ring-lug lead
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

One, two or four banana jacks.4 mm or 10 mm snap formats.Surface, flush or bench-edge mounting.Yellow, black or white faceplates.Straight lead or rear screw-terminal connection.Alternative cable length and ring-lug bore.

Planning a ESD Grounding Socket specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.