English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ESD والمنتجات المضادة للساكنة
ESD مأخذ التأريض
The ESD Grounding Socket is a fixed bonding point that consolidates wrist-strap, mat and equipment-ground connections at a workstation.
- Dual banana jacks provide convenient operator connection points.
- Central snap supports mat or accessory bonding.
- High-visibility faceplate distinguishes the ESD ground interface.
مقدمة المنتج
A durable yellow insulating faceplate carries two standard banana receptacles and a stainless snap interface. Rear terminals join the contacts to a green-and-yellow protective-earth conductor ending in a ring lug. Recessed mounting holes support bench, wall or furniture-panel installation while keeping the connection point visible and accessible.
الخصائص الرئيسية
Stainless snap accepts common mat-grounding hardware.
Rear screw or stud terminal provides a defined earth connection.
Bright yellow housing aids recognition during audits.
Recessed fasteners produce a tidy fixed installation.
Modular faceplate format suits benches and partition panels.
مخاوف المنتج للعملاء
A fixed bonding point must be readily identifiable, mechanically secure and electrically joined to the designated facility grounding network.
Operators connect to an unverified metal fixture.A dedicated yellow faceplate clearly identifies the approved bonding point.
One socket cannot serve a second operator.Dual banana receptacles provide two accessible cord connections.
Mat and wrist-strap connections compete for the same interface.Separate banana jacks and snap hardware accommodate different terminations.
A loose rear wire creates intermittent grounding.Mechanical terminal hardware and a crimped ring lug establish a serviceable connection.
Surface-mounted hardware is snagged or damaged.Recessed mounting holes and a compact plate protect the working interfaces.
تطبيقات نموذجية
Electronics assembly workbenches.Laboratory and service stations.ESD-protected room partitions.Grounded packing and inspection tables.Training and visitor work positions.
المعلمات الفنية
The representative dimensions below cover common fixed earth-bonding points; plate format, socket count, snap type and lead length can be configured.
| المواد الأساسية | Flame-retardant ABS faceplate with brass and stainless contacts |
|---|---|
| سمك اللوحة | 3.0–5.0 mm faceplate thickness |
| العرض الفعال | 85–120 mm faceplate width |
| الحد الأقصى الطول | Up to 3000 mm protective-earth lead length |
| الصلب يواجه سمك | 0.8 mm nominal stainless snap and terminal hardware thickness |
| الكثافة الأساسية | 1030–1080 kg/m³ ABS resin density |
| الموصلية الحرارية | 0.17–0.22 W/(m·K) |
| إنهاء السطح | High-visibility yellow matte molded faceplate with black and silver contacts |
| نوع المشترك | Dual banana receptacles and 10 mm snap bonded to rear earth terminal and ring-lug lead |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
One, two or four banana jacks.4 mm or 10 mm snap formats.Surface, flush or bench-edge mounting.Yellow, black or white faceplates.Straight lead or rear screw-terminal connection.Alternative cable length and ring-lug bore.
Planning a ESD Grounding Socket specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
