Yellow ESD grounding socket with dual banana jacks snap and earth lead

ESD および帯電防止製品

ESD 接地ソケット

The ESD Grounding Socket is a fixed bonding point that consolidates wrist-strap, mat and equipment-ground connections at a workstation.

Dual banana jacks provide convenient operator connection points.
Central snap supports mat or accessory bonding.
High-visibility faceplate distinguishes the ESD ground interface.

見積もりリクエスト製品案内

商品紹介

A durable yellow insulating faceplate carries two standard banana receptacles and a stainless snap interface. Rear terminals join the contacts to a green-and-yellow protective-earth conductor ending in a ring lug. Recessed mounting holes support bench, wall or furniture-panel installation while keeping the connection point visible and accessible.

主要な特徴

Two banana receptacles serve operator and guest leads.

Stainless snap accepts common mat-grounding hardware.

Rear screw or stud terminal provides a defined earth connection.

Bright yellow housing aids recognition during audits.

Recessed fasteners produce a tidy fixed installation.

Modular faceplate format suits benches and partition panels.

お客様の製品に関する懸念事項

A fixed bonding point must be readily identifiable, mechanically secure and electrically joined to the designated facility grounding network.

Operators connect to an unverified metal fixture.A dedicated yellow faceplate clearly identifies the approved bonding point.

One socket cannot serve a second operator.Dual banana receptacles provide two accessible cord connections.

Mat and wrist-strap connections compete for the same interface.Separate banana jacks and snap hardware accommodate different terminations.

A loose rear wire creates intermittent grounding.Mechanical terminal hardware and a crimped ring lug establish a serviceable connection.

Surface-mounted hardware is snagged or damaged.Recessed mounting holes and a compact plate protect the working interfaces.

典型的な用途

Electronics assembly workbenches.Laboratory and service stations.ESD-protected room partitions.Grounded packing and inspection tables.Training and visitor work positions.

技術的なパラメータ

The representative dimensions below cover common fixed earth-bonding points; plate format, socket count, snap type and lead length can be configured.

コア材料	Flame-retardant ABS faceplate with brass and stainless contacts
パネルの厚さ	3.0–5.0 mm faceplate thickness
有効幅	85–120 mm faceplate width
最大長さ	Up to 3000 mm protective-earth lead length
鋼鉄の厚さを直面する	0.8 mm nominal stainless snap and terminal hardware thickness
コア密度	1030–1080 kg/m³ ABS resin density
熱伝導率	0.17–0.22 W/(m·K)
表面仕上げ	High-visibility yellow matte molded faceplate with black and silver contacts
ジョイントタイプ	Dual banana receptacles and 10 mm snap bonded to rear earth terminal and ring-lug lead
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

One, two or four banana jacks.4 mm or 10 mm snap formats.Surface, flush or bench-edge mounting.Yellow, black or white faceplates.Straight lead or rear screw-terminal connection.Alternative cable length and ring-lug bore.

Planning a ESD Grounding Socket specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する