ESD cleanroom garment conductive coverall three-quarter view

Vestuário para sala limpa, EPI e consumíveis

Z ESD Cleanroom Garment (em inglês)

A groundable ESD cleanroom coverall combining conductive-grid fabric, connected garment panels and controlled cleanroom construction.

Conductive-grid polyester with panel-to-panel continuity
Configurable cuff grounding connection
Low-lint construction for ESD-controlled clean areas

Solicite um orçamento. Browse produtos

Introdução do produto

The ESD Cleanroom Garment is designed to participate in a facility-defined personnel grounding system while limiting particle release. Conductive-grid polyester forms the main shell, with conductive tape or thread linking the cuff, sleeves, yokes, torso and leg panels. A designated grounding stud allows connection to the approved wearer grounding route.

Características-chave

Conductive grid distributes charge across the garment surface

Integrated conductive paths connect multiple garment panels

Cuff grounding stud supports a defined bonding connection

Heat-sealed panel edges and pocket-free styling suit controlled areas

Adjustable closures help maintain body and interface coverage

Preocupações do produto do cliente

Conductive fabric alone does not ensure a safe path to ground. Panel continuity, garment bonding, compatible footwear or cord systems, laundering effects and routine verification all influence actual ESD performance.

Conductive panels can become isolated if seams do not provide continuity.Specify conductive tape or thread routes that electrically link the required garment panels.

An ungrounded conductive garment may behave as a floating conductor.Connect the designated stud to the facility-approved wearer grounding system and verify the complete system.

Laundering or damaged snaps can change the electrical path.Include garment continuity, grounding hardware and visual condition in periodic inspection and testing.

Loose cuffs or open closures can expose charge-generating personal clothing.Use fitted conductive cuffs and keep the front closure secured during ESD-controlled work.

Aplicações típicas

Suitable for semiconductor fabrication, electronics assembly, disk-drive and optics production, battery component processing, laboratories and other ESD-protected clean areas with a verified grounding program.

Parâmetros técnicos

The following ranges describe configurable garment construction, not a complete ESD system qualification. Final electrical requirements and test methods must correspond to the facility's approved ESD control plan.

Material principal	Continuous-filament polyester with integrated carbon or conductive yarn grid
Painel de espessura	0.22–0.50 mm
Largura efetiva	520–790 mm per laid-flat garment section
Comprimento máximo	2050 mm
Aço enfrentando espessura	0 mm; stainless steel may be used only for grounding studs and adjusters
Densidade Core	80–155 kg/m³ apparent fabric bulk density
Condutividade térmica	0.035–0.060 W/(m·K), material dependent
Superfície acabado	Smooth low-lint grid weave with heat-sealed panel edges
Tipo conjunto	Conductive sewn seams or integrated tape linking panels to a grounding stud
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Light-blue, white, navy or green conductive-grid fabricCuff stud, hip stud or defined grounding tape routeConductive knitted cuffs or adjustable woven cuffsStand collar or compatible hood interfaceOpen ankles or compatible ESD boot interfaceGarment identification for laundering and verification tracking

Planning a ESD Cleanroom Garment specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe